JVC GZ-MS120 60

Troubleshooting (Continued)

Recording

	Trouble	Action
		• SD card is full. Delete unnecessary files or replace the SD card.
	Recording cannot be
	performed.
		• Insert a commercially available SD card, and set each of the
		[VIDEO SLOT SELECTION] and [IMAGE SLOT SELECTION] to
	Recording stops by	[SLOT A] or [SLOT B].
	itself.	• Recording stops automatically after 12 hours of non-stop recording.
		To ensure continuous recording, set [AUTO SWITCH REC MEDIA]
		to [ON] before you start recording. (Z p. 56)
		• Use backlight compensation.
	The recorded subject is	• Set [GAIN UP] to [AGC] or [AUTO].
	too dark.	• Use [NIGHT] from scene select.
		• Set the brightness to the [+] side.
	The recorded subject is	• Set the backlight compensation to off if it is being used.
	too bright.	• Set the brightness to the [–] side.
	Digital zoom does not	• Change [ZOOM] to [80X/DIGITAL] or [800X/DIGITAL].
	work.	• Digital zoom is not available in the still image recording mode.
	The focus is not	• Wipe the lens with lens cleaning cloth.
	adjusted automatically.	• If you are recording in a dark place or a subject that has no
	adjusted automatically.	contrast between dark and light, adjust the focus manually.
		contrast between dark and light, adjust the focus manually.
	The color looks strange.	• Set [WB] in [MANUAL SETTING] appropriately to the light source.
	(Too bluish, too reddish,	• Select [MWB] in [WB] while holding a sheet of plain white paper in
	(Too bluish, too reddish,	front of the camcorder so that the white paper fills the screen. Keep
	etc)
	etc)	touching OK until the B indicator appears.
		touching OK until the B indicator appears.
	White balance setting	• This cannot be used if [SEPIA] or [MONOTONE] are selected as
	cannot be activated.	effects.
	cannot be activated.	• Do not use [TWILIGHT] from scene select.
		• Do not use [TWILIGHT] from scene select.
	The continuous	• The continuous shooting speed will drop after continuous shots.
	shooting speed is slow.	• Continuous shooting speed may drop depending on the recording
	shooting speed is slow.	media or under certain recording conditions.
		media or under certain recording conditions.
	Band of bright light	• This occurs when there is a bright light source near the camcorder.
	appears on the LCD	This is not a malfunction. Change the direction of the camcorder to
	monitor.	prevent the light source comes into view.