JVC HM-DT100U 92 EN, Error Codes and Messages, CODE, MESSAGE, DESCRIPTION

92 EN TROUBLESHOOTING (cont.)

Error Codes and Messages

Some error codes and messages may appear on the TV screen when operating the VCR. Refer to the chart below for the solution.

CODE	MESSAGE	DESCRIPTION
102	“REC PROHIBITED”	• An attempt was made to make a D-VHS recording of a
		program for which only the analog information is copy
		protected.
		• While making a D-VHS recording of a program, a
		signal in which only the analog information is copy
		protected was input to this VCR.
103	“REC PROHIBITED”	• An attempt was made to dub a D-VHS recording of a
		digitally copy protected program.
		• While dubbing a D-VHS recording, digitally copy
		protected information was input to this VCR.
		• This VCR supports copy protection technologies such
		as DTLA, and cannot record programs that employ
		digital copy protection.
104	“CAN NOT DECODE VIDEO OR AUDIO	• A signal that is not compatible with this VCR was input.
	USE SET TOP BOX OR HDTV TUNER”	• Switch to the analog input for recording. (It may be
		possible to play back the material if using a digital
		tuner*, etc.)
105	“CAN NOT REC DIGITAL INPUT BY S-	• An attempt was made to make an S-VHS/VHS
	VHS/VHS”	recording of a signal from an i.LINK device other than a
	“CHOOSE ANALOG INPUT”	digital tuner*.
		• The i.LINK connector on this VCR is intended only for
		D-VHS recording. This VCR does not convert a digital
		signal into an analog signal for recording. Switch to the
		analog input for recording.
107	“CAN NOT REC DIGITAL INPUT BY S-	• An attempt was made to make an S-VHS/VHS
	VHS/VHS”	recording using the timer function with “i.LINK”
	“USE ANALOG TIMER PROGRAMMING”	selected on the digital tuner* side.
		• The i.LINK connector on this VCR is intended only for
		D-VHS recording. This VCR does not convert a digital
		signal into an analog signal for recording. Also, it is not
		possible to make a D-VHS recording on VHS tape.
		Switch to the analog input for recording.
108	“REC BY HS MODE”	• When 720p, 1080i signals are recorded in STD/LS3
		mode, select HS mode to record program properly.
200	“CAN NOT DECODE VIDEO OR AUDIO	• An attempt was made to play back a signal that is not
	USE SET TOP BOX OR HDTV TUNER”	supported by this VCR.
		• To play back the signal, use the digital tuner*, etc., that
		was used to record the signal.
201	“WAIT A MINUTE CALIBRATING. . .”	• Normal playback is being prevented by mosaic noise,
		etc.
		• Wait while the VCR calibrates itself so that it can output
		a normal image.
202	“COPY RESTRICTED PROG OUTPUT 480i	• When playing back a program that was copy protected
	VIDEO”	in 1080i, 720p, or 480p mode, the VCR down-converts
		to 480i mode for output.
203	“COPY RESTRICTED PROG CAN NOT	• An attempt was made to play back a tape containing a
	PLAY BACK”	copy protected program.
		• Even if you record a copy protected program, this VCR
		cannot play it back.
205	“CAN NOT PLAY BACK THIS TAPE”	• An attempt was made to play back a tape containing an
		invalid D-VHS recording.