Masterpage:Right-NoTitle0

EN 15

Filename [HM-HDS4EX_04Basic.fm]
Page 15 April 2, 2003 2:20 pm
CSelect the language.
DPerform Auto Set Up.
Press OK. The AUTO SET/T-V LINK display appears on
the front display panel and/or on the TV screen.
If you have connected the recorder to a TV offering T-V Link
via a 21-pin SCART cable (pg. 12) and the TV is turned on,
the recorder automatically performs “Preset Download”
(pg. 16) even if you select “Auto” or “AUTO SET” in step D.
NOTES:
In the area where no TV station transmits a PDC (Programme
Delivery Control) signal, the recorder can perform neither
Auto Clock Set nor Auto Guide Program Number Set.
If there is a power cut, or if you press 1 or MENU while Auto
Set Up is in progress, Auto Set Up will be interrupted; be sure
to turn off the recorder power once and try again from step A.
Auto Clock Set may not function properly depending on the
reception condition.
If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels
(pg. 93, “INFORMATION”).
Press OK. The Language Set
display appears on the TV
screen.
Press rt to move the
highlight bar (pointer) to the
language of your choice.
(Example) DEUTSCH is selected.
On the front display panel
Press rt to select “Auto”
and press OK or e.
On the on-screen display
Press rt to move the
highlight bar (pointer) to
AUTO SET” and press OK or
e.
Auto” blinks on the front display panel; do NOT
press any button on the recorder or remote control
until the front display panel shows clock time,
“(CH) 1” or “– –:– –” as illustrated on page 17.
DANSK
SUOMI
NORSK
SVENSKA
NEDERLANDS
CASTELLANO
ITALIANO
FRANCAIS
DEUTSCH
ENGLISH
If you are using the on-screen
display, the AUTO SET
screen will appear. As Auto
Set Up progresses, the “q
mark on the TV screen
moves from left to right.
When the Auto Set Up is
completed, “SCAN
COMPLETED” appears for
about 5 seconds, then the
normal screen appears.
ATTENTION
Once you have performed Auto Set Up, even if the recorder’s
memory backup has expired, all the stored stations and their
Guide Program numbers remain in the recorder’s memory
and the recorder will not perform Auto Set Up again. You
only need to set the clock. (pg. 86)
If you have moved to a different area, perform each setting as
required.
Tuner Set (pg. 88)
Clock Set (pg. 86)
If a new station starts broadcasting in your area, perform
tuner setting (pg. 88).
Beginning End
HM-HDS4EX.book Page 15 Wednesday, April 2, 2003 3:55 PM