JVC 0503-AH-ID-JVE, ENLPT0736-001B, HM-HDS4E Output/Input Set

Filename [HM-HDS4EX_06Edit.fm]
Masterpage:Left
68 EN
Page 68 April 2, 2003 3:20 pm
EDITING (cont.)
Output/Input Set
L-1 OUTPUT and L-1 INPUT Setting
The L-1 IN/OUT connector accepts and delivers either a
composite signal (regular video signal) or a Y/C signal (a signal
in which the luminance and chrominance signals are separated).
Set “L-1 OUTPUT” and “L-1 INPUT” to the appropriate mode
depending on the type of appliance connected to the recorder’s
L-1 IN/OUT connector.
AAccess the Main Menu screen.
Press MENU.
BAccess the Input/Output Set screen.
CSelect the output or input mode for the L-1
IN/OUT connector.
APress rt to move the arrow to “L-1 OUTPUT” or “L-1
INPUT”, then press OK.
BPress rt to select the appropriate setting, then press
OK.
* The default setting is bold in the table below.
DReturn to the normal screen.
Press MENU.
NOTES:
●If “L-1 OUTPUT” is set to “S-VIDEO”, it is impossible to set
“L-1 INPUT” to “S-VIDEO”.
●If “L-2 SELECT” is set to “DECODER”, it is impossible to set
“L-1 INPUT” to “S-VIDEO”.
?
APress w e to move the
arrow to “FUNCTION SET
UP”, then press t.
BPress w e to move the
arrow to “INPUT/
OUTPUT”.
8L-1 OUTPUT
VIDEO: If a connected appliance’s input is
compatible only with regular video
signals, set to “VIDEO”.
S-VIDEO: If a connected appliance’s input is
compatible with Y/C signals, set to
“S-VIDEO”. You can obtain
high-quality S-VHS picture. (For
connection, be sure to use a 21-pin
SCART cable that is compatible with
the Y/C signal.)
8L-1 INPUT
VIDEO: If a connected appliance’s output is
compatible only with regular video
signals, set to “VIDEO”.
S-VIDEO: If a connected appliance’s output is
compatible with Y/C signals, set to
“S-VIDEO”. You can obtain
high-quality S-VHS picture. (For
connection, be sure to use a 21-pin
SCART cable that is compatible with
the Y/C signal.)
HM-HDS4EX.book Page 68 Wednesday, April 2, 2003 3:55 PM