Filename [HM-HDS4EX_06Edit.fm]
Masterpage:Left
76 EN
Page 76 April 2, 2003 3:20 pm

SYSTEM CONNECTIONS

Connecting To A Satellite Receiver

Simple Connections

This is an example of simple connection if your TV has
one 21-pin AV input (SCART) connector.
Connect the satellite receiver to the L-2 IN/DECODER
connector, then connect the L-1 IN/OUT connector to the
TV’s connector.
NOTES:
●Be sure to use a 21-pin SCART cable (not an S-Video cable) for
the satellite receiver connection.
●Set “L-2 SELECT” to “A/V” (墌pg. 69).
●You can use Automatic Satellite Programme Recording
function (墌pg. 51) with this connection.
●To record a programme via the satellite receiver, select L-2
mode by pressing AUX (number key “0”) and/or VCR PR so
that “L-2” appears on the front display panel.
●For details, refer to the instruction manual of the satellite
receiver.
IMPORTANT
When you set “L-2 SELECT” to “SAT” (墌pg. 69), it is possible to view a satellite broadcast with the TV set to its AV mode even if
the recorder is turned off. When the recorder is in Stop mode or recording, press TV/VCR on the remote control to turn off the VCR
indicator on the front display panel.
●If you turn on the recorder when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the
satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the recorder to the video mode.
SAT CONTROL
CONTROLEUR SAT
S VIDEO
OUT
SORTIE
Outdoor unit
Satellite cable
Satellite receiver
Aerial
TV aerial cable
21-pin SCART connector
Back of TV
ANTENNA
IN
ANTENNA
OUT
Aerial connector
Mains outlet
Back of recorder
HM-HDS4EX.book Page 76 Wednesday, April 2, 2003 3:55 PM