Filename [HM-HDS4EX_07Sub.fm]
Masterpage:Left
86 EN
Page 86 April 2, 2003 3:11 pm
SUBSIDIARY SETTINGS (cont.)
Clock Set
ATurn on the recorder.
Press 1.
BAccess the Main Menu screen.
Press MENU.
CAccess the Initial Set screen.
APress w e to move the arrow to “INITIAL SET UP”,
then press t.
BPress w e to move the arrow to “INITIAL SET”, then
press OK.
DAccess the Clock Set screen.
Press rt to move the highlight bar (pointer) to “CLOCK
SET”, then press OK or e. The Clock Set screen appears.
NOTE:
When you have selected MAGYARORSZÁG,
C
ESKÁ
REPUBLIKA, POLSKA, or OTHER EASTERN EUROPE for the
country setting (墌pg. 14, 18), you cannot use Just Clock
function. Skip steps F and G on page 87.
●Turn on the TV and select the AV mode.
●Slide TV/CABLE/SAT switch to the right.
Just Clock
The Just Clock function provides accurate time keeping
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
The Just Clock option can be set “ON” or “OFF” at the Clock
Set screen (the default setting is “OFF”). Press OK until the
Just Clock setting begins blinking, then press rt to change
the setting.
IMPORTANT: If you turn off Just Clock, the accuracy of your
recorder’s built-in clock may be reduced, which could
adversely effect timer recording. We recommend you to keep
Just Clock on. In cases where the clock setting data from a
PDC signal is incorrect, however, you are advised to keep
Just Clock set to “OFF”.
?
IMPORTANT
If you performed Auto Set Up (墌pg. 14) or Preset
Download (墌pg. 16), without ever having set the clock
previously, the recorder’s built-in clock is also set
automatically.
Perform the following steps only if —
—Auto Clock Set has not been performed correctly by Auto
Set Up, Preset Download or Auto Channel Set.
OR
—the recorder’s memory backup has expired.
OR
—you want to change Just Clock setting (墌“Just Clock” in
the left column).
HM-HDS4EX.book Page 86 Wednesday, April 2, 2003 3:55 PM