28
HV-34LH21/34LH51/34LH71/29WH21/29WH51/29WH71/29VH21 / GGT0020-001A-H / English
Using the TV’s menu
2 Press the DISPLAY button to display
“ID NO.” (ID number input screen).
3 Press the number buttons to enter the
ID number.
The lock is temporarily released so you
can view the TV channel.
If you have forgotten the ID number:
Perform step 1 of “To s et this function:” on
page27. After confirming the ID number,
press the TV/VIDEO b utton to exit the me nu.
When you would like to cancel the
CHANNEL GUARD function, you must
perform the operation “To set this
function” again.
AUTO SHUTOFF
You can set your TV to turn off if no signal is
received for about 15 minutes or longer
after the end of a broadcast.
ON:
This function is turned on.
OFF:
This function is turned off.
The AUTO SHUTOFF function does
not turn off the TV’s main power.
The AUTO SHUTOFF will not work for
a VIDEO mode.
VIDEO-3 SETTING
Set the VIDEO-3 SETTING correctly
according to the video signal input from the
external device connected to the VIDEO-3
terminal. If this setting is incorr ect, images
will not be displayed.
VIDEO:
If a normal video signal (composite video
signal) is input.
COMPONENT:
If a Component video signal (Y/CB/CR
signals) is input.
For detailed connecting methods, see
“Additional preparation” on page35.
This Television is compatible with the
Progressive video signal (525P signal)
only when the component video signal
is input.
PIP
[Except HV-34LH21/HV-29WH21/
HV-29VH21]
You can enter the Twin or PIP mode from
the menu without using the remote control.
This menu will be useful if you cannot find
the remote control around you.
For detailed description of Twin and
PIP mode, see “Twin and PIP (picture
in picture) function” on page 15.
1 Choose PIP, then press the MENU/OK
button.
2 Display Twin or PIP pictur e as you like.
First press the 6 button to choose an
item listed, then press the MENU/OK
button. Next press the 5 button to
choose one of options, then press the
MENU/OK button.
PIP/TWIN
Each time you press the 5 button, the
screen mode changes as follows:
TWIN PIP OFF (normal screen)
SUB INPUT
Each time you press the 5 button, the
input source of the sub picture changes as
follows:
VIDEO-1 VIDEO-2 VIDEO-3
VIDEO-4 TV
SWAP
Each time you press the MENU/OK button,
the main picture and the sub picture will be
swapped.
If PIP/TWIN is selected OFF, then
SUB INPUT and SWAP disappears in
PIP menu.
HV-34LH&29WH_Eng.bo ok.fm Page 28 Monday, Sept ember 1, 2003 7:59 PM