Menuoperations
1(Hold)
If no operation is done for about 60 seconds, the operation will be canceled.
2
3Repeat step 2 if necessary.
To return to the previous menu, press .
To exit from the menu, press DISP or MENU.
|
| Menu item |
| Selectable setting (Initial: [XX]) |
| DEMO | For settings, | page 4. | |
| CLOCK |
|
| |
| COLOR | For settings, | page 13. | |
| COLOR SETUP |
|
| |
|
| DIMMER SET | Selects the display and button illumination adjusted in the <BRIGHTNESS>/ | |
| DIMMER |
| <COLOR SETUP> setting. | |
|
| [AUTO]: Changes between the Day and Night adjustments when you turn | ||
|
|
| off/on the car headlights. *1 | |
|
|
| ON: Selects the Night adjustments. | |
|
|
| OFF: Selects the Day adjustments. | |
|
| BRIGHTNESS | DAY[31]/NIGHT[15]: For settings, page 14. | |
| DISPLAY | SCROLL *2 | [ONCE]: Scrolls the display information once. | |
| TAG DISPLAY | [ON]: Shows the TAG information while playing MP3/WMA tracks. | ||
|
|
| AUTO: Repeats scrolling (at | |
|
|
| OFF: Cancels. |
|
|
|
| OFF: Cancels. |
|
| PRO EQ | For settings, | page 14. | |
|
| FADER *3*4 | R06 — F06[00]: Adjusts the front and rear speaker output balance. | |
|
| BALANCE *4 | L06 — R06[00]: Adjusts the left and right speaker output balance. | |
|
| LOUD | ON: Boosts low and high frequencies to produce a | |
|
| (Loudness) | a low volume level. | |
| AUDIO |
| [OFF]: Cancels. |
|
| VOL ADJUST | |||
|
| (Volume adjust) | compared to the FM volume level. Before adjustment, select the source you | |
|
|
| want to adjust. (“VOL ADJ FIX” appears if “FM” is selected.) | |
|
| SUB. W | OFF: Cancels. |
|
|
| (Subwoofer) | [ON]: Turns on the subwoofer output. | |
|
| SUB.W LPF *5 | LOW 55Hz/MID 85Hz/[HIGH 120Hz]: Audio signals with frequencies | |
|
| (Subwoofer low- | lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer. | |
|
| pass filter) |
|
|
*1 The illumination control lead connection is required. (See “Installation/Connection Manual”.) This setting may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to other than <DIMMER AUTO>.
*2 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *3 If you are using a
*4 This adjustment will not affect the subwoofer output.
*5 Displayed only when <SUB.W> is set to <ON>.
16 ENGLISH