Adjusting the sound

You can adjust the sound characteristics to your preference.

•When appears on the display, you can move back to the previous display by pressing number button 3.

1

2

• For “EQ” setting, see the following.

3Adjust the selected setting item.A Fad/Bal (Fader/Balance)

1 Press number button 1 () to move

to the “Fad/Bal” adjustment display.

2Adjust the speaker output balance by pressing:

5/ ∞: between the front and rear speakers. [F06 to R06]

4/¢: between the left and

right speakers. [L06 to R06]

BSubwoofer

1 Press number button 1 () to move

to the “Subwoofer” adjustment display.

2Use4/¢to select a cutoff frequency to the subwoofer.

•80Hz: Frequencies higher than 80 Hz are cut off.

•120Hz: Frequencies higher than 120 Hz are cut off.

•160Hz: Frequencies higher than 160 Hz are cut off.

3Turn the control dial to adjust the subwoofer output level. [0 to 8]

C VolAdjust, [–5 to +5]

 

Turn the control dial to adjust the input level

 

of each source (except FM).

ENGLISH

• Before making an adjustment, select a

Adjust to match the input level of the FM

 

sound level.

 

source you want to adjust.

 

DLoudness, [Off or On]

Turn the control dial to select “Off” or “On.” When “On” is selected, low and high frequencies sound are boosted to produce a well-balanced sound at low volume level.

4Exit from the setting.

Storing your own sound modes

You can adjust the sound modes and store your own adjustments in memory.

• When appears on the display, you can move back to the previous display by pressing number button 3.

1

or

Follow steps 1 and 2 on the left column.

• In step 2, select “EQ.”

2Select a sound mode.

To display the rest

Continued on the next page

SETTINGS 29