ENGLISH

To deactivate the TA Standby Reception

The TP indicator goes off.

PTY Standby Reception

PTY Standby Reception allows the receiver to switch temporarily to your favorite PTY programme from any source other than AM.

•This function also takes effect for the DAB tuner.

To select your favorite PTY code for PTY Standby Reception, see page 33.

The PTY indicator either lights up or flashes.

To activate the PTY Standby Reception

1

2Select one of the PTY codes.

•If the PTY indicator lights up, PTY Standby Reception is activated.

•If the PTY indicator flashes, PTY Standby Reception is not yet activated.

To activate PTY Standby Reception, tune in to another station (or service) providing these signals. The PTY indicator will stop flashing and remain lit.

To deactivate the PTY Standby Reception

Select “PTY Off” in step 2.

The PTY indicator goes off.

Tracking the same programme—

Network-Tracking Reception

When driving in an area where FM reception is not sufficient enough, this receiver automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below).

When shipped from the factory, Network- Tracking Reception is activated.

To change the Network-Tracking Reception

setting, see “AF-Regn’l” on page 33.

Programme A broadcasting on different frequency areas (01 – 05)

3Exit from the setting.

PTY indicator appears.

14