Menu operations

AUDIO

Menu item

Selectable setting (Initial: [XX])

FADER *5*6

R06 — F06[00]: Adjusts the front and rear speaker output balance.

BALANCE *6

L06 — R06[00]: Adjusts the left and right speaker output balance.

LOUD

ON: Boosts low and high frequencies to produce a well-balanced sound at

(Loudness)

a low volume level.

 

[OFF]: Cancels.

VOL ADJUST

-05 — +05[00]: Presets the volume adjustment level of each source,

(Volume adjust)

compared to the FM volume level. Before adjustment, select the source you

 

want to adjust. (“VOL ADJ FIX” appears if “FM” is selected.)

L/O MODE

Select if the REAR/SW terminals are used for connecting the speakers or

(Line output

subwoofer (through an external amplifier).

mode)

SUB.W: Subwoofer

 

[REAR]: Speakers

SUB. W *7

OFF: Cancels.

(Subwoofer)

[ON]: Turns on the subwoofer output.

SUB.W LPF *8

LOW 55Hz/MID 85Hz/[HIGH 120Hz]: Audio signals with frequencies

(Subwoofer low-

lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.

pass filter)

 

SUB.W LEVEL *8

00 — 08[08]: Adjusts the subwoofer output level.

(Subwoofer level)

 

HPF *8

ON: Activates the High Pass Filter. Low frequency signals are cut off from

(High-pass filter)

the front/rear speakers.

 

[OFF]: Deactivates. (All signals are sent to the front/rear speakers.)

BEEP

[ON]/OFF: Activates or deactivates the keypress tone.

(Keytouch tone)

 

TEL MUTING *9

ON: Mutes the sounds while using the cellular phone (not connected

(Telephone

through KS-BTA100).

muting)

[OFF]: Cancels.

AMP GAIN *10

LOW POWER: VOLUME 00 — VOLUME 30 (Select if the maximum power of

(Amplifier gain)

each speaker is less than 50 W to prevent damaging the speakers.)

 

[HIGH POWER]: VOLUME 00 — VOLUME 50

*5 If you are using a two-speaker system, set the fader level to “00”.

*6 This adjustment will not affect the subwoofer output.

*7 Displayed only when <L/O MODE> is set to <SUB.W>.

*8 Displayed only when <SUB.W> is set to <ON>.

*9 This setting does not work if <BT ADAPTER> is selected for <R-AUX> of <SRC SELECT>. *10 The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER>

with the volume level set to higher than “VOLUME 30”.

ENGLISH 13