JVC KD-SX999R, KD-SX959R 6

ENGLISH

RADIO BASIC OPERATIONS

Listening to the radio

LO/RPT/INT

(ONLY FOR KD-SX999R)

1DAB

FM/AM

Select the band (FM1, FM2, FM3 or AM).

You can select any one of FM1, FM2, and FM3 to listen to an

FM station.

F1 F2 F3 AM (FM1) (FM2) (FM3)

		Selected band (or clock time: see page 30)
		appears.
2	To search stations	Start searching a station.
	To search stations
	of higher
	of higher	When a station is received, searching stops.
	frequencies	When a station is received, searching stops.

To search stations of lower frequencies

To stop searching before a station is received, press the same button you have pressed

for searching.

To tune in a particular frequency without searching

1 Press FM/AM/DAB repeatedly to select the band (FM or AM).

2 Press and hold¢ or 4 until “MANU (Manual)” starts flashing on the display. Now you can manually change the frequency while “MANU” is flashing.

3 Press¢ or 4 repeatedly until the frequency you want is reached.

•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM–MW/LW) until you release the button.

To tune in FM stations only with strong signals (ONLY FOR KD-SX999R)

Press the LO/RPT/INT (Local/Repeat/Intro) button so that the LOCAL indicator lights up on the display.

Each time you press the button, the LOCAL indicator lights up and goes off alternately.

Note:

This function only works while searching FM stations including SSM preset (see page 7).