JVC 0706TNH-II-IM, LCT2128-001B-A, LT-46FN97 No VCR Connection, Cable Holder, Remove the terminal cover, Output, (Attachment), Coaxial Cable, TV Rear Panel, Cable or Antenna, Illustration of LT-46FN97

Quick Setup

Cable Holder

A cable holder which keeps your connection cables tidy is attached on the back of the stand. To open, loosen the screws with you fingers. After putting the cables in the cable holder, attach it to the back of the stand again by tightening the screws with your fingers.

Illustration of LT-46FN97

Remove the terminal cover

There are connection terminals behind the cover on the left in the back of the TV. Remove the cover before connecting an antenna or other devices. The cover can be removed by removing the hooks. When replacing the cover, place the side of the cover against the TV and insert the hooks.

Note:

• Leave the terminal cover off if they do not fit properly. Do not force to replace the cover. Doing so may damage the connection cables and cover.

No VCR Connection

Cable or Antenna	Coaxial Cable
Output
	(Attachment)
IN	OUT OUT

Two-way Splitter (Attachment)

TV Rear Panel

12