Troubleshooting

Refer to the table below to check the condition. If you think that there is a problem, contact the JVC Service Center where you purchased the television.

PROBLEMS

 

CHECK

There is no power

• See if the power cord became unplugged.

 

 

 

• Check for a blown fuse or circuit breaker or a power outage.

 

 

 

 

There is no picture

• The antenna could be disconnected.

 

 

• The input mode could be set improperly. See page 59.

or sound

• The tuner (Auto Tuner Setup) could be set improperly. See page 41.

 

 

• The TV station may be having difficulties. Check to see if other stations are working.

 

• Use the HDMI cable with HDMI logo

 

. See page 19.

 

 

 

 

 

• If you have a device connected to INPUT-1 or INPUT-2, you will not be able to hear any

 

audio from the AUDIO OUT on the back of the TV.

 

• You cannot output audio using the OPTICAL OUTPUT when you have digital sound from

 

an HDMI device connected to the INPUT-1 or INPUT-2 connection on the back of the TV.

 

(See page 18).

 

 

 

• This TV can accept 480i (Composite / S / HDMI / Component), 480p, 720p and 1080i

 

signals. Please check your settings.

 

 

 

 

 

Remote control is not

• Check to see that the batteries are still working and properly installed.

operating properly or

• Make sure the remote has a clear sight path to the TV.

at all

• You may be too far from the TV. You must be within 23 feet (7 meters).

 

 

 

You cannot select a

• Make sure the channels have been programmed. See "Channel Summary", page 42.

certain channel

• Check to see if the channel is locked. See "Channel Summary - Lock" page 43.

 

 

 

The power turns off

• Make sure the set did not become unplugged.

by itself

• Perhaps the On/Off Timer is set. See page 54.

 

• Check to see if the Sleep Timer was set. See page 61.

 

 

 

It does not operate

• This television is operated by a microprocessor. It is possible that external noise or

correctly

interference is causing the problem. If the television does not function correctly, remove the

 

electrical plug from the wall outlet and wait a while before inserting it into the wall outlet

 

again and operating the television.

 

 

 

 

 

The clock is wrong

• The power was interrupted and the clock was not reset. See page 53.

 

 

 

The color quality

• Tint and Color may be improperly adjusted. See page 47.

is poor

• The Video Status mode may be turned to the wrong setting. See page 60.

 

 

 

There are lines

• There could be interference from another electrical appliance, such as a computer,

across the picture

another TV or VCR. Move any such appliances further away from the TV.

 

 

 

The picture is spotted

• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,

 

operating nearby. Move the antenna away from the appliance or change to a coaxial

 

cable connection which is less prone to interference.

 

 

 

There are double

• A building or passing airplane can reflect the original signal and produce a second,

pictures (ghosts)

slightly delayed one. Adjust your antenna position.

 

 

 

Picture is snowy

• Your antenna may be damaged, disconnected or turned. Check the antenna

(image noise)

connection. If the antenna is damaged, replace it.

 

 

 

Screen is 80% black

• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 37.

 

 

 

Stereo or bilingual

• Make sure the MTS settings are correct. See page 64.

programs can't be

 

 

 

heard

 

 

 

 

 

 

 

74