Page 33 December 4, 2001 5:14 pmPerfect Connections
This is an example of recommended connection if your
TV has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver’s connector
if you have a decoder, L-1 IN/OUT connector to TV’s
connector, and L-2 IN/DECODER connector to the
satellite receiver’s connector. Then connect the satellite
receiver and TV.
●Set “L-2 SELECT” to “A/V” (墌pg.31).
●To record a programme via the satellite receiver, select L-2
mode by pressing AUX (number key “0”) and/or PR so that
“L-2” appears on the front display panel.
●To receive a scrambled broadcast, descramble the signal with
the satellite receiver.
●For details, refer to the instruction manual of the satellite
receiver and decoder.
TV aerial cable
Back of TV
Back of recorder
HRS5950EU1-EN.book Page 33 Tuesday, December 4, 2001 5:32 PM