Depending on the stop position and rotation speed of the horizontal/vertical rotation platform, the running sound of the rotation platformfs motor may be heard, but this is not a malfunction.
When using multicast, make use of a IGMPv2- compliant network switch.
Some hubs/switches of products that are equipped with intelligent features may include a broadcast/ multicast suppression function. Viewing of multicast images on this product may fail if this function is enabled.
The electronic shutter of this product is set to 1/60 by default. For regions with a commercial power supply frequency of 50 Hz, switch to the 1/100 during use under fluorescent lights (excluding inverter lighting equipment) to prevent flickers. When the B&W mode is set to AAutoB, the image turns
If the power supply voltage is momentarily cut off or reduced due to lightning or turning on of the air conditioner’s power, the image may be disrupted or noise interference may occur.
As the dome cover is of a semiglobular shape, image distortion will occur at the hemispherical edge. When the hemispherical edge of this unit is masked and horizontal level is shot in a tilt direction, the hemispherical edge will enter the field angle. This may cause the upper edge of the screen to become black and the focus unclear. In this case, you can avoid shooting the above area by using the tilt limit settings (A Page 70).
When shooting objects with a luminance difference or near a light source, ghost may occur on the screen. This is a feature of the dome cover and the
In particular, manual and auto pan operation near the TELE edge (telephoto side) may cause the screen to vibrate (unsmooth rotation). This is a feature of the motor and is not a malfunction.
As long magnification lens is used in this product, the focus may be unclear due to temperature changes but this is not a malfunction.
Preset the focus under an environment with a temperature closest to that in your actual usage. If the temperature change is large and the focus becomes unclear, preset the focus again before using the product.
If you sense that the focus has become unclear due to temperature changes, use the Auto Foucua(AF) function or reset the focus manually.
Transporting the unit
Remove the connecting cables when transporting the unit.
When transporting the unit, turn off the power of the system.
Pack the unit with cushioning material so as to avoid shock when transporting.
Handle the unit with care and do not subject it to vibration or shock.
Copyright Protection
With the exception of the user being the copyright holder or when permission such as for duplication has been granted by the copyright holder, permission is required in principle for the duplication, modification, or transmission of copyrighted video and audio data. Unauthorized duplication, modification, or transmission of copyrighted material may constitute a copyright infringement, and the user may be liable to compensate for any damages. When using copyrighted video/audio data, be sure to check the license agreement of the copyrighted material thoroughly.
When rights or rights holders are involved with regard to the targeted duplicating subject, permission may be required for shooting or using (processing) it. Be sure to check the licensing conditions thoroughly.
Maintenance
Turn off the power before performing maintenance. Wipe using a soft cloth.
Wiping with thinner or benzene may melt or tarnish its surface. For tough stains, wipe using a cloth that is dipped into a neutral detergent diluted with water, followed by wiping with a dry cloth.
When the same position is monitored for 24 hours continuously over a long period, the increased contact resistance on the horizontal rotation section may cause noise interferences in the images and operation from the computer may become unstable. As such, this product is equipped with an auto cleaning function that performs cleaning once a week.
Saving Energy
If the camera is not to be used for a long time, turn off the power of the system for safety and energy conservation reasons.
10