Basic Settings1

This page is for performing basic setting related to the network.

This page can be used during access using AadminB.

●Click [Basic Settings1].

●Press the [OK] button to enable the new settings.

●If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.

Click

A

B

C

D

E

F

Memo:

●You can open the [Basic Settings1] screen without going through the built-in viewer by entering the

following URL address (

 

contains model name) in the address field of Internet Explorer.

●Enter the model name in lowercase letters.

（Example） VN- V225U series is displayed :

http://192.168.0.2/cgi-bin/ v225 display.cgi? v225 basicmenu1.html

Network

 

A IP Setting

For setting the DHCP client function.

 

Connect camera to a network environment with a DHCP

 

server when DHCP is to be enabled. If the DHCP server does

 

not exist when [IP Setting] is set to ADHCP EnableB, camera

 

will start running with the 192.168.0.2 IP address and

 

255.255.255.0 subnet mask in about 2 minutes after startup.

 

(A Page 6)

B IP Address

For setting the IP address of camera.

C Subnet Mask

For setting the subnet mask of camera.

D Default Gateway

For setting the default gateway of camera.

 

Enter 0.0.0.0 if you do not want to set a default gateway.

Time

 

E Time

Displays the clock time of camera.

 

The time transmitted by camera is recorded in the JPEG

 

header. Discontinuity may occur in the JPEG header's time

 

immediately before and after changing the time.

F Time Zone

For setting the time zone.

G PC Time to Camera

Click the [Set] button to set the time of the computer on

 

camera.

17