Setting Using Internet Explorer

Setting (continued)

Encoding Page

This page is for setting JPEG and MPEG4 encoding parameters.

This page can be used during access using AadminB or AoperatorB.

●Click [Advanced Settings] to display setting menu.

●Click [Encoding].

●Press the [OK] button to enable the new settings.

●If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.

●When settings on this page are altered during playback using the built-in viewer, reboot the viewer.

●There is upper limit to transmission bit rate from the camera. If a bit rate that exceeds upper limit is

specified, this new setting will not be applied. For details on the maximum transmission limit, refer to the section on ANetwork RequirementsB (A Page 3).

Click

A

B

C D E F G

26