Checking the Preset Hue Area

1 Set the [ZEBRA ON/OFF] switch at the front of the camera recorder to the [SKIN AREA/SPOT METER] end.

Doing so forcibly turns ON the Skin Adjust function temporarily, and the preset hue area is displayed in color on the LCD monitor and viewfinder.

[ZEBRA ON/OFF]

Switch

Color Bar Output

Multi-format color bars can be output on this camera recorder.

[USER1,USER2,USER3] Buttons

[FULL AUTO] Switch

Memo :

●When [Color Gain] in the [Camera Process] menu is set to AOffB, only the area where Skin Detail is functioning is displayed in skin tone. (A Page 83)

●When [SKIN A./SPOT M.] of [Switch Set] in the [Camera Function] menu screen is set to ASpot MeterB, the hue area cannot be checked using the

[SKIN AREA/SPOT METER] switch. (A Page 80)

Setting

To output color bars, follow the setting procedure below.

1 Set the [FULL AUTO] switch to AOFFB.

2 Set [Bars] in the [Camera Function] menu to AOnB. (A Page 78)

Color bars are output.

Color Bar Output Using the USER Buttons

1 Set the [FULL AUTO] switch to AOFFB.

2 Assign ABarsB to any one of the [USER1]/[USER2]/ [USER3] buttons.

Set using [USER1]/[USER2]/[USER3] of [Switch Set] in the [Camera Function] menu. (A Page 79)

3 Press the corresponding [USER1]/[USER2]/ [USER3] button that is assigned with ABarsB.

Color bars are output.

Memo :

●During color bar output, you can select whether to output the reference audio signals using [Test Tone] in the [Audio Set] menu. (A Page 77)

●When the [FULL AUTO] switch is set to AONB and [Bars] in the [FULL AUTO] menu is set to AOffB, color bars are not output in the AUX and Media modes.

115