HOW TO INSTALL BATTERIES
1. Open the battery compartment cover.
2. Install two “AAA” batteries (supplied).
3. Replace the battery compartment cover.
12.VOL (VOLUME) + / – / CURSOR / Buttons - Used to operate the menu functions of the LCD TV. Press the button to increase, or the button to decrease the sound level.
13.ENTER Button - Use to enter or select information for On-Screen operations.
14.EXIT Button - Press to remove setup menu.
15.CCD Button - Used to display the Closed Caption menu screen.
16.DISPLAY Button - When you press this button, the current information will be displayed on a screen. To remove the display from the screen, press this button again.
17.AUDIO Button - Change sound track language.

Remote control

1

2

3

4

5

6

7

8

9

7.RESET Button - Press to reset the On-Screen picture adjustments to their factory preset positions. To use this function, select “Picture” or “Audio” in the menu screen, then press this button.

8.INPUT SELECT Button - Use to change the external input.

9.SCREEN SIZE Button - Used to change the picture size.

10

10.RECALL Button - This button allows you to go

11

back to the previous channel selected by just

12

pressing the RECALL button. Press this button

again to return to the channel you were watching.

13

11.MUTING Button - To turn off the sound, press

this button once. The LCD TV will be silenced and

14

the symbol “Muting” will appear on the screen.

The muting feature can be released by pressing

15

the MUTEING button again or one of the VOL

16

(VOLUME) + or – buttons.

17

 

1.POWER Button - Used to turn the power on/off to the LCD TV.

2.Direct Channel Selection Buttons (0-9) - Allows direct access to any channel of the LCD TV.

3.– Button -This button is the “–” button used when selecting digital channels.

4.SLEEP Button - To set the LCD TV to turn off after a preset amount of time, use the SLEEP button on the remote control.

5.CH (CHANNEL) / / CURSOR / Buttons - Used to operate the menu functions of the LCD TV, and to change the channels of the LCD TV.

6.MENU Button - Use to display the On-Screen menu function.

Before using the remote control, batteries must first be installed.

Use two “AAA” size batteries. The batteries may last approximately one year depending on how much the

remote control is used. For best performance, it is recommended that batteries should be replaced on a yearly basis, or when the remote operation becomes

erratic. Do not mix old and new batteries or different

types.

If this symbol is shown, it is only valid in the European union.

10

BATTERY PRECAUTIONS

These precautions should be followed when using batteries in this device:

• Use only the size and type of batteries specified.

• Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)