Connections to other equipment

(continued)

To connect the TV/DVD to a PC (Personal Computer)

Before you connect this TV/DVD to your PC, change the adjustment of your PC’s Resolution and Refresh rate (60 Hz).

Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR on the rear of the TV/DVD. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to the AUDIO connector of the PC/DVI AUDIO IN jack of the TV/DVD.You can also connect the PC with HDMI cable. If you use HDMI cable, you don’t have to connect the audio cord. If you use DVI-to-HDMI cable, please connect audio cord as same way as VGA cable.

Press INPUT SELECT on the remote control to select PC mode.

Switch on the computer. The TV/DVD can operate as the computer monitor.

Rear of the unit

ENGLISH

To PC

MONITOR IN

To PC/DVI

 

VGA cable

AUDIO IN

To HDMI IN

(not supplied)

HDMI cable (not supplied)

Monitor Display modes

MODE Resolution Refresh rate

VGA

640x480

60/ 72/ 75 Hz

VGA

720x400

70Hz

SVGA

800x600

56/ 60/ 72/ 75 Hz

XGA

1024x768

60/ 70/ 75 Hz

WXGA

1280x768

60Hz

WXGA

1360x768

60Hz

To return to normal mode Press INPUT SELECT again.

Audio cord (not supplied)

NOTE:

• The on-screen displays will have a different appearance in PC mode than in TV mode.

• If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV-screen.

To connect a HDMI or a DVI device to the unit

The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device.

When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.

Rear of the unit

 

 

 

To HDMI out

 

 

 

 

 

or

HDMI device

 

 

 

 

 

 

To PC/DVI

To HDMI IN

 

DVI device

 

 

AUDIO IN

HDMI cable (type A connector)

 

 

 

 

 

 

 

 

 

 

(not supplied)

To DVI output

 

 

 

HDMI - to - DVI adapter cable

 

 

 

 

 

 

 

 

(HDMI type A connector)

 

 

 

 

 

(not supplied)

 

 

 

 

 

Audio cord (not supplied)

 

 

 

NOTE:

 

 

 

 

•

When using HDMI to connect your HDMI or DVI devices, you must select the corresponding audio

 

 

input source (HDMI or DVI) on the menu screen (see page 18). Otherwise you will only see the

 

•

image with no sound.

 

 

 

 

If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable

 

 

or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To

 

 

receive the picture you must change the output resolution on the external component.

 

35

 

Should you require further instruction, please contact the manufacturer of the external component.