Connections to other equipment

(continued)

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below. Rear of the unit

ENGLISH

Digital Audio

Coaxial Output

Coaxial digital cable (not supplied)

Front

Speaker

(Left)

Front

Subwoofer Speaker

(Right)

TV

To Coaxial

Digital Audio Input

AV Amplifier with built-in digital surround decoder as listed above

 

Center Speaker

Surround

Surround

Speaker (Left)

Speaker

 

(Right)

NOTE:

• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio. There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.

To connect the TV to a PC (Personal Computer)

BEFORE YOU CONNECT THIS TV TO YOUR PC, CHANGE THE ADJUSTMENT OF YOUR PC’S RESOLUTION AND REFRESH RATE (60 HZ).

Connect one end of a (male to male) VGA cable to the video cord of the computer and the other end to the VGA connector PC MONITOR on the rear of the TV. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to the AUDIO connector of the PC/DVI AUDIO IN jack of the TV.You can also connect the PC with HDMI cable. If you use HDMI cable, you don’t have to connect the audio cord. If you use DVI-to-HDMI cable, please connect audio cord as same way as VGA cable.

Press INPUT SELECT on the remote control to select PC mode.

Switch on the computer. The TV can operate as the computer monitor.

Rear of the unit

To

PC/DVI AUDIO

IN

To PC MONITOR IN

To HDMI IN HDMI cable (not supplied)

Monitor Display modes

MODE

Resolution

Refresh rate

VGA

640x480

60/ 72/ 75 Hz

VGA

720x400

70Hz

SVGA

800x600

56/ 60/ 72/ 75 Hz

XGA

1024x768

60/ 70/ 75 Hz

WXGA

1280x768

60Hz

WXGA

1360x768

60Hz

SXGA

1280x1024

60Hz

WXGA+ 1440x900

60Hz

VGA cable (not supplied) Audio cord (not supplied)

FHD 1920x1080 60Hz

To return to normal mode Press INPUT SELECT again.

NOTE:

• The on-screen displays will have a different appearance in PC mode than in TV mode.

• If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV-screen.

• When the PC connected to the HDMI terminal and 1920x1080 resolution (FHD) is selected, The top and bottom, right and left edges of the picture may be hidden on all PICTURE SIZE. In this case, use the PC MONITOR IN jack (VGA cable) is recommended to connect.

13