JVC Ghosting, I can’t turn it on, Severe noise or snow, Patterns, stripes or noise, The remote control doesn’t work, page, Sound, Basics, Screen, is off, Problem

When you have trouble

Troubleshooting

Severe noise or snow

Problem

Actions

 Is the ATV reception poor, too?

Following the instructions in “Severe noise or snow”

can solve this problem.

page

44

Is the TV connected correctly to the aerial?

Change the direction of the aerial.

Is the aerial or its cable damaged?

Consult your retailer

Patterns, stripes or noise

Is the aerial receiving interference from high-voltage power lines or wireless transmitters?

Consult your retailer

Are connected devices too close to the TV?

Insert the minimum distance between the aerial and the cause of interference until no interference

Ghosting

(Doubling of images)

Are you receiving interference from signals reflected off mountains or buildings?

Adjust the direction of your aerial, or change to a good-quality directional aerial

I can’t turn it on!

 Is the power cord connected to the AC outlet correctly?

The remote control doesn’t work!

Are the batteries flat?

Are you more than 7 meters away from the TV?

Is the “MODE (TV, VDR/DVR, DVD, HC)” set to “TV”?

When viewing teletext, the TV menu bar does not appear.

Depending on the stability of the signal, there may be a time lag when changing channels.

	Not displayed
	(black screen)
Basics	Remote control
	stops working
	DTV screen is frozen
	Some functions
	do not work
Screen	Aspect ratio changes
	unintentionally
	PC screen alignment
	is off

Poor picture quality

Picture

Strange picturewhen using an external device

Sound	Poor sound
	No sound from the
	audio component

 Is there a DTV transmission tower nearby?
Turn “Attenuator” to “On”, since the radio waves
are too strong.
 There may be problems at the antenna, radio waves,
or the area you live in, where reception is bad.
Consult your retailer.
 Unplug TV, several minutes later plug it in again.
 Hold down “		” and “	” on the TV
simultaneously to restart.
 It is not a malfunction. Some functions (dark background)
in the menu do not work depending on the situation.
 Press “	” to return to your settings.
 Adjust the “PC Position”.
 Unnatural colour >>>			Adjust “Colour” and “Bright-1”.
			Check your “Colour System”.
 Noise >>> Set to the following functions.

Picture Mode : Standard

Super DigiPure : Max

Dull picture >>> Set to the following functions. Picture Mode : Bright

Super DigiPure : Min

If you connected S-Video output device, check the “S-IN” setting.

If the top of the image is distorted, check the video signal quality itself.

If movement appears unnatural when receiving a signal from a DVD player, etc. with 625p (progressive-scanning), change the output setting of the external device to 625i (interlace-scanning).

Adjust the “Bass” and “Treble”.

If receiving a poor signal in “Stereo / t·u”, switch to “Mono”.

Audio signals received from EXT-5 and EXT-6 can not be sent to the “AUDIO OUT” terminal.

35
–	IMPORTANT!
–
–	PREPARE
–
20
26
35
42	USE
35
42
35
42
27	SETTINGS
–
–
35	TROUBLE?
35
–

44 45