JVC LT-42E910, LT-46E910 manual 14

(not supplied)

HDMI cable (type A connector)

(not supplied)

NOTE:

• When using HDMI1/DVI to connect your HDMI or DVI devices, you must select the corresponding audio input source (HDMI or DVI) on the menu screen (see page 17). Otherwise you will only see the image with no sound.

To connect the LCD TV to a PC (Personal Computer)

Before you connect this LCD TV to your PC, change the adjustment of your PC’s Resolution and Refresh rate (60 Hz).

Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to the AUDIO connector of the PC/DVI AUDIO IN jack of the TV.You can also connect the PC with HDMI cable. If you use HDMI cable, you don’t have to connect the audio cord. If you use DVI-to-HDMI cable, please connect audio cord as same way as VGA cable.

Press INPUT SELECT on the remote control to select PC mode. Switch on the computer. The TV can operate as the computer monitor.

Right and rear of the unit

HDMI - to - DVI adapter cable

(HDMI type A connector)

To HDMI IN

Connections to other equipment (continued)

To connect the LCD TV to a HDMI or a DVI device to the unit

The HDMI1/DVI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device.

When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.

Right and rear of the unit Audio cord (not supplied)		To DVI output
	To PC/DVI
	AUDIO IN		DVI device

or

HDMI device To HDMI out

Monitor Display modes

MODE Resolution Refresh rate

		VGA	640x480	60/ 72/ 75 Hz
		VGA	720x400	70Hz
		SVGA	800x600	56/ 60/ 72/ 75 Hz
	To PC	XGA	1024x768	60/ 70/ 75 Hz
		WXGA	1280x768	60Hz
	MONITOR
		WXGA	1360x768	60Hz
To PC/DVI	IN
	VGA cable (not supplied)	SXGA	1280x1024	60Hz
AUDIO IN		WXGA+ 1440x900		60Hz
To HDMI IN	Audio cord (not supplied)	FHD	1920x1080	60Hz
	HDMI cable (not supplied)	To return to normal mode
		Press INPUT SELECT again.

NOTE:

• The on-screen displays will have a different appearance in PC mode than in TV mode.

• If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV-screen.

• When the PC connected to the HDMI terminal and 1920x1080 resolution (FHD) is selected, the top and bottom, right and left edges of the picture may be hidden on all PICTURE SIZE. In this case, use the PC MONITOR IN jack (VGA cable) is recommended to connect.

• When the PC’s resolution is set to 1920 x 1080/60 Hz (FHD mode), a signal that differs from the FHD signal, which has been confirmed operational on this TV, may appear depending on the PC used. In this case, “Auto Adjust” or other Position Adjustment functions may fail to correct the image position.

14

To solve this problem, change the PC settings to select another resolution.