38
English
Note:
Refer also to the instruction
supplied with your video
components.
The AV COMPU LINK remote control system allows you to use the five basic functions
listed below.
Remote Control of the TV, DVD player, and VCR Using This
Remote Control
See pages 40 and 41 for details.
For the DVD player and the VCR:
• Aim the remote control directly at the remote sensor on the each component.
For the TV:
• Aim the remote control directly at the remote sensor on the receiver.
One-Touch Video Play
Simply by inserting a video cassette without its safety tab into the VCR, you can
activate the video playback without setting other switches manually.
The receiver automatically turns on and changes the source to the VCR.
The TV automatically turns on and changes the input mode to the correct position so
that you can view the VCR playback.
When you insert a video cassette with its safety tab, press the play (33
33
3) button on the
VCR or on the remote control. So, you can get the same result.
One-Touch DVD Play
Simply by starting playback on the DVD player, you can enjoy the DVD playback
without setting other switches manually.
The receiver automatically turns on and changes the source to “DVD” or “DVD
MULTI”—DVD playback mode is automatically selected when a disc played in stereo,
while DVD MULTI playback mode is automatically selected when a disc is played back
using the analog discrete output mode on the DVD player or the audio output setting of
the DVD player is mixed to two front channels.
The TV automatically turns on and changes the input mode to the position so that you
can view the playback picture.
Automatic Selection of TV’s Input Mode
• When you select TV SOUND as the source to play through the receiver, the TV
automatically changes the input mode to the TV tuner.
So, you can watch TV, without changing the input mode on the TV.
• When you select “DVD,” “DVD MULTI” or “VCR” as the source to play on the
receiver, the TV automatically changes the input mode to the correct position (either
Video Input 1 or 2) so that you can watch the playback picture.
Automatic Power On/Off
The TV, VCR, and DVD player turn on and off along with the receiver.
When you turn on the receiver;
• If the previously selected source is “VCR,” the TV and VCR will turn on
automatically.
• If the previously selected source is “TV SOUND,” only the TV will turn on
automatically.
• If the previously selected source is “DVD” or “DVD MULTI,” the TV and DVD
player will turn on automatically.
When you turn off the receiver, the TV, VCR, and DVD player will turn off.
Note:
When you start playing a disc of
5.1 ch surround, “DVD MULTI” will
be selected though you have
previously selected “DVD.” You
can change it to “DVD” after
playback starts.
Note:
If you turn off the receiver while
recording on the VCR, the VCR
will not turn off, but continue
recording.
EN20-46.RX-60VGD[UF]/F 98.8.27, 5:33 PM38