Resolution Setting

The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu or pressing the RESOLUTION button in stop mode.

Note:

Since several factors affect the resolution of video output, see “Video output according to the Resolution setting” on next page.

Auto – If the HDMI OUT jack is connected for TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV. If the COMPONENT VIDEO OUT is only connected, this changes the resolution to 1080i as default resolution.

1080p – Outputs 1080 lines of progressive video.

1080i – Outputs 1080 lines of interlaced video.

720p – Outputs 720 lines of progressive video.

480p – Outputs 480 lines progressive video.

480i – Outputs 480 lines of interlaced video.

How to change the resolution using RESOLUTION button

Press RESOLUTION button in stop mode.

RESOLUTION button

How to change the resolution using Setup menu

1.Press HOME and the Home Menu appears.

2.Select [Setup] and press ENTER. The Setup menu appears.

3.Use v / V to select [DISPLAY] option then press B to move to the second level.

4.Use v / V to select the [Resolution] option then press B to move to the third level.

5.Use v / V to select the desired resolution then press ENTER to confirm your selection.

Available resolution according to connection and media format

HDMI OUT connection

•If you select a resolution manually and then con- nect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto].

•If the [1080p Display Mode] option is set to

[24 Hz], the 1080p video output frame rate may be automatically set to either 24Hz or 60Hz depend- ing both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc.

COMPONENT VIDEO OUT connection

•For the 720p, 1080i, 1080p resolution setting with protected media, real output resolution of COM- PONENT VIDEO OUT will be outputted at 480p resolution.

•Even if the resolution is set to 1080p, non-copy protected BDs and DVDs playback are outputted at 1080i resolution.

•BD or DVD video stream could prevent up-scaling on analog output.

VIDEO OUT connection

•The resolution of the VIDEO OUT jack is always outputted at 480i resolution.

Notes:

•Depending on your display, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. In this case, press HOME key then RESOLUTION repeatedly until the picture re-appear.

•This player supports simultaneous output of all video out jacks. The resolution of the HDMI output may not be the same as the resolution output on the component video output.

•When the 1080p/24Hz video source is outputted via HDMI connection, the VIDEO OUT and COM- PONENT VIDEO OUT will not output any video signal.

Installation and Setup

17