
Spot Exposure Control
MODE: /
Selection of a spot metering area enables more precise exposure compensation. You can select one of the three metering areas.
Set the power switch to
.
Press and hold
(
) so that
is displayed.
Press
(
) twice so that the
indicator appears.
●The spot metering area frame appears at the center.
Press
to select the desired spot metering area frame.
Press
. The setting is completed.
To lock the exposure
After step 4, press and hold for over 2 seconds. The
indicator appears.
To cancel spot exposure control
Press (
) once so that the
indicator disappears.
NOTES:
●Spot exposure control may not be possible when some other functions are activated.
●Depending on the shooting location and condition, optimum result may not be attained.
© 2004 Victor Company of Japan, Limited