DSC
[ ] =
The Picture Quality mode can be selected to best match your needs. Two Picture Quality modes are available: FINE ( 
) and STANDARD ( 
) (in order of quality).
NOTE:
The number of storable images depends on the selected picture quality as well as the composition of the subjects in the images and the type of memory card being used. ( pg. 27)
IMAGE SIZE640 x 480 / 1024 x 768 / [1152 x 864] /1600 x 1200
The Image Size mode can be selected to best match your needs. ( pg. 27)
NOTE:
The setting can be changed only when the VIDEO/ MEMORY Switch is set to “MEMORY”.
REC SELECT[ 
(TAPE)]: When Snapshot recording is performed with the VIDEO/MEMORY Switch set to “VIDEO”, still images are recorded only onto the tape.
/
(TAPE/CARD): When Snapshot recording is performed with the VIDEO/ MEMORY Switch set to “VIDEO”, still images are recorded not only onto the tape but also in the memory card (640 x 480 pixels). In this mode, the “SNAP/SLOW” selection in CAMERA Menu is also applicable to memory card recording.
Allows you to select the shooting interval for interval shooting. ( pg. 28)
Playback Menus
VIDEO
[ ] =
During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on page 36, select “SOUND MODE” or “NARRATION” from the Menu Screen and set it to the desired parameter.
SOUND MODE
[STEREO 
]: Sound is output on both “L” and “R” channels in stereo.
SOUND L 
: Sound from the “L” channel is output.
SOUND R 
: Sound from the “R” channel is output.
[OFF]: Original sound is output on both “L” and “R” channels in stereo.
ON: Dubbed sound is output on both “L” and “R” channels in stereo. ( pg. 54)
MIX: Original and dubbed sounds are combined and output in stereo on both “L” and “R” channels.