Other Settings
Attaching the Shoulder Strap
| Buckle |
Eyelet | Strap Guide |
|
ENGLISH
Checking the Remaining Battery Power
Preparation:
•Attach the battery pack.
•Press the SELECT PLAY/REC button to select recording mode.
For ! mode:
Press the INFO button twice or the INFO button and then select ;.
For # mode:
Press the INFO button.
DIRECT | BATTERY CONDITION |
BACK UP |
|
| MAX TIME |
min
INFO
QUIT
LTo return to the normal screen Press the INFO button again.
NOTES
•If “COMMUNICATING ERROR” appears, there may be a problem with your battery. In such a case, consult your nearest JVC dealer.
•The recordable time display should only be used as a guide. It is displayed in 10 minute units.
Preparing the Remote Control
A battery is included inside the remote control at the time of purchase.
Remove the insulation sheet before use.
Beam Effective Area
Remote Sensor
Effective distance: 5 m (16 ft)
NOTE
The transmitted beam may not be effective or may cause incorrect operation when the remote sensor is directly exposed to sunlight or powerful lighting.
To Reinsert the Battery
Pull out the battery holder by pressing the lock tab.
Lock Tab
Lithium Battery (CR2025)
15