FURTHER INFORMATION

Troubleshooting

The camera is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly.

The following phenomena are not malfunctions.

The camera heats up when it is used for a long time.

The battery heats up during charging.

When playing back a video fi le, the image stops momentarily or the sound is interrupted at junctions between scenes.

To solve the problem, fi rst follow the instructions below.

If the problem is not solved, reset the camera. ( below)

If the problem persists, please consult your nearest JVC dealer.

LTo reset the camera

1)Close the LCD monitor to turn off the camera and remove the power supply (battery pack or AC adapter) from the camera, then reattach it.

2)Select [FACTORY PRESET] from the MENU.

ENGLISH

Power

Recording

Trouble

Action



 

Connect the AC adapter securely.

14

 

No power is supplied.

Detach the battery pack once again and reattach it fi rmly.

14

 

Replace the dead battery with a fully charged one.

The power does not

Make sure to use the camera under appropriate operating

36

turn on, or the battery

temperatures.

 

operation time is

The battery is worn out and needs to be replaced. Please

extremely short even

purchase a new one.

 

after the battery is fully

 

 

charged.

 

 

The access/charge

Charging may stop in places subject to extremely high/low

temperatures to protect the battery. It is recommended

 

lamp on the camera

to charge it in places with a temperature of 10°C to 35°C

 

does not light during

(50°F to 95°F).

 

charging.

When the battery is already fully charged, the lamp does

15

 

not light. Check the remaining battery power.

 

Recording cannot be

Recording medium is full. Delete unnecessary fi les or

20

performed.

replace the microSD card.

 

Select the recording medium properly.

 

During recording, the

Touch the DISP button once.

13

date/time does not

 

 

appear.

 

 

During video recording,

The temperature of the camera is increasing. If the

the 7REC indicator

camera continues to heat up, recording may be stopped

 

to protect the recording medium. In this case, turn off the

 

flashes.

 

power, and then wait until the camera cools down.

 

 

 

Digital zoom does not

Change the settings in [ZOOM].

work.

Digital zoom is not available in the still image recording

mode.

 

 

 

 

 

 

33