Open the microSD card cover.

Other Settings

Using a microSD Card

The camcorder is programmed to record on the built-in hard disk when it is shipped from the factory. You can change the recording medium to microSD card.

•Operations are confirmed on the following microSD cards.

-Panasonic

-TOSHIBA

-SanDisk

-ATP

Video recording:

Class 4 or higher compatible microSDHC card (4 GB to 8 GB)

For UXP mode, use Class 6 or higher.

Still image recording:

microSD card (256 MB to 2 GB) or microSDHC card (4 GB to 8 GB)

•If other media are used, they may fail to record data correctly, or they may lose data that had already been recorded.

•MultiMediaCards are not supported.

•Video data may not be recorded onto the microSD cards on which video data have already been recorded using the devices from other manufacturers.

Insert a microSD card

Preparation:

Close the LCD monitor to turn off the camcorder.

1

2 Firmly insert the card with its clipped edge first.

3 Close the microSD card cover.

To remove a microSD card Push the microSD card once.

After the card comes out a little, pull it out.

NOTE

•Insert and remove the microSD card only while the power is turned off. Otherwise, data on the card may be corrupted.

•Do not touch the terminal on the reverse side of the label.

Change the recording medium

Set [REC MEDIA FOR VIDEO] and [REC MEDIA FOR IMAGE] to [SD].

Format a microSD card when using it for the first time

Select [FORMAT SD CARD] to format the card.

EN 17