Getting Started
Grip Adjustment
①Flip the grip belt over.
②Adjust the length of the belt.
③ Fasten the grip belt.
CAUTION:
●Be sure to fasten the grip belt properly.
If the belt is loose, this unit may drop and result in injuries or damages.
Using the Hand Strap
When using the hand strap, loop it around your wrist.
Removing the Strap
●While pressing [1], pull [2] and remove the strap.
Attaching the Strap
●Push in firmly until it clicks into place.
Inserting an SD Card (NAND/SD Models)
When a commercially available SD card is inserted, recordings can still be made to the card without stopping when the remaining recording time on the internal memory runs out.
"Types of Usable SD Card" （A P.13）
1Press the power button for more than 2 seconds to turn off this unit.
2Open the card slot cover.
3Insert an SD card.
CAUTION:
●Make sure not to insert the card in the wrong direction. It may cause damage to the unit and card.
●Turn off the power of this unit before inserting or removing a card.
NOTE:
●Recording switches automatically from one media to another and vice versa after the card or memory space in the selected media is full.
●To record to the card, it is necessary to adjust media settings.
When no card is available, set media settings to “HDD” for recording.
"REC MEDIA FOR VIDEO
●To use cards that have been used on other devices, it is necessary to format (initialize) the card using “FORMAT SD CARD” from media set- tings.
Removing the Card
Push the card inward once, then pull it out straight.
12