JVC Model GR-D244US Blank Search, Still Playback, Shuttle Search, Normal Playback, 20 EN VIDEO PLAYBACK, VOL, MENU, MENU, MENU, MENU, To control the speaker volume

20 EN VIDEO PLAYBACK

Normal Playback		● During playback, press and hold 5or 3. The
Normal Playback		search continues as long as you hold the button.
5	VOL. +/–	Once you release the button, normal playback
5	VOL. +/–	resumes.
3		resumes.
3	Lock Button	● A slight mosaic effect appears on the display
4/9	Lock Button	● A slight mosaic effect appears on the display
4/9		during Shuttle Search. This is not a malfunction.
8		during Shuttle Search. This is not a malfunction.
8		ATTENTION:
Speaker	M A	ATTENTION:
Speaker	M A	During Shuttle Search, parts
		During Shuttle Search, parts
		of the picture may not be
	Power	clearly visible, particularly on
	Switch	the left side of the screen.
MENU
1 Load a cassette. ( pg. 16)		Blank Search
2 Set the Power Switch to “PLAY” while		Blank Search
2 Set the Power Switch to “PLAY” while		Helps you find where you should start recording
pressing down the Lock Button located on the		Helps you find where you should start recording
switch.		in the middle of a tape to avoid time code
3 To start playback, press 4/9.		interruption. ( pg. 19)
3 To start playback, press 4/9.		1 Load a cassette. ( pg. 16)
4 To stop playback, press 8.		1 Load a cassette. ( pg. 16)
● During Stop mode, press 3to rewind, or 5		2 Set the Power Switch to “PLAY” while
to fast-forward the tape.		pressing down the Lock Button located on the
		pressing down the Lock Button located on the
To control the speaker volume		switch.
Slide the Power Zoom Lever (VOL. +/–) towards		3 Press MENU. The Menu Screen appears.
“+” to turn up the volume, or towards “–”to turn		4 Press MENU to select “t”. The VIDEO
down the volume.		Menu appears.
NOTES:		Menu appears.
NOTES:		5 Press + or – to select “BLANK SRCH”, and
● The playback picture can be viewed in the LCD		press MENU. The Sub Menu appears.
monitor, viewfinder or on a connected TV.		press MENU. The Sub Menu appears.
monitor, viewfinder or on a connected TV.		6 Press + or – to select “EXECUTE”, and press
( pg. 21)		6 Press + or – to select “EXECUTE”, and press
● If Stop mode continues for 5 minutes when power		MENU.
is supplied from a battery, the camcorder shuts off		● The “BLANK SEARCH” indication appears and
automatically. To turn on again, set the Power		the camcorder automatically starts reverse or
Switch to “OFF”, then to “PLAY”.		forward search, then stops at the spot which is
● When a cable is connected to the AV connector,		about 10 seconds of tape before the beginning of
the sound is not heard from the speaker.		the detected blank portion.
		● To cancel Blank Search, press 8.

Still Playback	NOTES:

Pauses during video playback.

1)Press 4/9during playback.

2)To resume normal playback, press 4/9 again.

● If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.

Shuttle Search

Allows high-speed search in either direction during video playback.

1)During playback, press 5for forward search, or 3for reverse search.

2)To resume normal playback, press 4/9.

●Before starting Blank Search, if the current position is at a blank portion, the camcorder searches in the reverse direction. If the current position is at a recorded portion, the camcorder searches in the forward direction.

●If the beginning or end of the tape is reached during Blank Search, the camcorder stops automatically.

●A blank portion which is shorter than 5 seconds of tape may not be detected.

●The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.