Basic and Common Operations
PressFunctions

 

Turn on or off the power
Adjust the volume

 

• Light the display screen for 5 seconds when the power is

 

Press

Functions

Press

Functions

 

turned off.

 

 

 

 

Turns on or off the power

 

Adjust the volume level from 00 to a

 

• Temporarily stop the alarm sound when the alarm is ringing

 

 

 

(SNOOZE).

 

When the power is turned off at volume level “15”

 

maximum of 20.

 

(see “Stopping alarm sound”)

 

or higher, the unit automatically sets the volume

 

–: Turn down the volume.

 

 

 

level to “14” the next time it is turned on.

 

+: Turn up the volume.

 

 

 

 

 

Press

Functions

 

iPod connector plug

 

Press

Functions

 

 

 

• Switch on/off the backlight when the
Switch the temperature

 

 

 

 

 

 

 

 

button is held down.
display between Celsius/

 

 

 

FM MODE/

 

 

 

• Switch FM stereo/monaural when FM is
Fahrenheit.

 

 

 

 

 

 

 

 

selected.

 

 

 

 

 

¢

 

 

 

 

 

(see “Playing back from iPod” and

 

 

 

 

 

4

“Listening to FM Broadcasts”)

 

 

 

 

 

6

 

 

 

 

 

 

Select a source

 

 

 

 

 

Press

Functions

 

See “How to set the

Remote control

 

 

Select a source

 

 

 

iPod FM AUX

 

time and use the alarm” sensor

 

 

 

 

Display Information

 

Sound source indicatoriPod/FM/AUX (blinks while muted)

 

 

 

When adjusting the volume

00 - 20

 

Playing back from iPod

Setting the iPod on the unit

1 Select the attachment compatible to your iPod (see “iPod Compatibility Chart”).

Attachment name

2Match the attachment tab to the hole in the unit, and insert the attachment to the unit.

3Connect the iPod to the connector plug of the unit.Always set volume to the minimum level when connecting or disconnecting iPod.When you connect your iPod to the unit, make sure you insert it all the way.When disconnecting the iPod, make sure that the System is turned off.

Listening to the iPod

1Connect the iPod to the unit.2Turn the unit power on.3Select “iPod” with the “SOURCE” button.When iPod is selected as sound source, it automatically starts playback.

 

Press

Functions

 

Unit

Remote control

 

 

 

6

 

Playback/Pause

 

 

Press and hold this button to switch the iPod to sleep mode.

 

 

¢

 

Next song / fast forward (press and hold)

 

4

 

Previous song (Press this button during playback to jump back

 

to the beginning of the track.) / fast rewind (press and hold)

 

 

Charging the iPod

 

 

The iPod is charged while it is set on the unit when the Unit power is on.

 

• Connect the AC adaptor to the Unit. The iPod battery is not charged whileCHARGING SWITCH
the Unit is operated on the battery power supply.

 

• The iPod is charged regardless of the sound source selected on the Unit.

 

• See the iPod instruction manual about charging times.

 

• The “CHARGING SWITCH” is located inside of battery compartment on

 

the rear of the Unit.

 

 

Set the “CHARGING SWITCH” to “FIREWIRE” for 10GB/15GB/20GB/

 

30GB/40GB iPod 3rd Generation. For all other models, you can set the

 

switch to either “FIREWIRE” or “USB” to charge the iPod.

 

Date

 

When FM radio is selectedP01 - P20 (channel) /

 

 

87.5 - 108.0 MHz (frequency)

 

 

 

Current time/

 

 

 

 

 

 

When the source is set to iPod and theiPod (slow blinking)

 

 

 

 

 

alarm time

 

alarm is set to TIMER PLAY

 

Day of the week

 

 

 

 

When the source is set to FM radio and87.5 - 108.0 MHz P01-P20

 

 

 

 

 

 

 

 

 

 

the alarm is set to TIMER PLAY

 

 

 

 

 

 

Temperature

 

 

When battery power is low

- - -

 

 

When trying to set alarm to TIMER PLAY

 

 

 

 

 

 

 

 

 

while selecting AUX

 

‹Explanation of Icons
Off: current time / On: alarm time

 

“STEREO” is displayed when an FM stereo broadcast is received.

Off: alarm off / On: alarm on / Blinking: alarm sounding (When “TIMER PLAY” is set)

 

“MONO” is displayed when the monaural is selected. (see “Listening to FM Broadcasts ”)

 

Current time: Blinking / Other Clock Display: Lighting
Blinks while snoozing (the alarm is paused)

 

 

 

iPod Compatibility Chart

 

 

4 GB mini 1st GenerationiPod nano

iPod nano 2nd Generation

iPod video 5th Generation

iPod video 5th Generation

iPod model

4 GB mini 2nd Generation

1GB/2GB/4GB2GB/4GB/8GB

 

30GB

 

60GB/80GB

 

 

6 GB mini 2nd Generation

 

 

Attachment namesmininano2G nano

 

VIDEO 30GB

 

VIDEO 60GB

 

 

 

 

 

 

 

iPod 3rd Generation 10GB/15GB/20GB

 

iPod 3rd Generation 30GB/40GB

iPod model

 

iPod 4th Generation 20GB

 

 

 

iPod 4th Generation 40GB

 

 

iPod photo 4th Generation 20GB/30GB

 

iPod photo 4th Generation 40GB/60GB

 

Rubber pad

 

A type (Large)

 

 

 

B type(Small)

 

Attachment name

iPod

Combine this attachment with the

rubber pads.

 

Select the rubber pad size which matches your iPod model.

 

 

 

 

 

• Select the appropriate attachment for your iPod model.
How to combine the rubber pads with the attachment

There are two types of rubber pad : “A type (Large)” and “B type (Small)”. Select the appropriate rubber pads for your iPod model.

A type (Large)

B type(Small)

Insert the rubber pads narrow-end first.
How to set the time and use the alarm
Switch/Press

Functions

 

Switch the alarm on/off.

 

OFF: turn off the alarm (BUZZER/ TIMER PLAY).

 

BUZZER: alarm on (buzzer sound)

 

TIMER PLAY: alarm on (iPod/FM radio)

 

• Switch between current time and alarm time.

 

• Press and hold this button to select the current time/alarm time setting mode.

Change the values for the time setting.

Setting the Clock

1Switch to current time display with the “SET” button.2Press and hold the “SET” button. The year display starts flashing.3While flashing, set each item with the “DOWN”/“UP” buttons.4Press the SET button.

When the “SET” button is pressed, the flashing items will change in the following order.

Year Month Day 12/24-hour time Hour Min. time display• The time is set when switching to time display from Minutes.

NOTES

The time can be set both when the power is on and off.To modify the setting, start again from step 1.

Setting the alarm (ALARM-BUZZER)

1Switch to alarm time display with the “SET” button. “ALARM” icon appears on the display.

2Press and hold the “SET” button. The hour display starts flashing.

3While flashing, set each item with the “DOWN”/“UP” buttons.

When the “SET” button is pressed, the flashing items will change in the following order.

Hour Min. TIMER PLAY time (10 to 30) time display• It is not necessary to set the “TIMER PLAY” time at this point.
4Switch the “ALARM” switch to “BUZZER”.

To check the set time, switch the display to alarm time by pressing the “SET” button.

The buzzer sounds for three minutes.

Selecting iPod or FM radio for the alarm sound (ALARM-TIMER PLAY)

1 Set the alarm time.(See steps 1 to 3 of “To set the alarm (ALARM-BUZZER)”)

Hour Min. TIMER PLAY time (10 to 30) time display

You can set the duration of time between timer-on and timer-off from 10 minutes to 30 minutes in TIMER PLAY time.

2If the power is off, turn the unit power on.3Confirm that you can hear the iPod or FM radio.Set to an appropriate volume.

4Switch the “ALARM” switch to “TIMER PLAY”. The selected source is blinking on the display.

CAUTION:

“AUX” cannot be selected as a source. Select another source.The “TIMER PLAY” does not work when the Unit power is turned off.

Stopping alarm sound

‹To pause the alarm (snooze)

Press the “SNOOZE/LIGHT” button while the alarm in sounding, when the alarm is set with either “ALARM-BUZZER” or “ALARM-TIMER PLAY”.

The alarm sound is temporarily stopped, and started again 5 minutes later. You can repeat this up to 10 times.

‹To stop the alarm (BUZZER/ TIMER PLAY)
Switch the “ALARM” switch to “OFF”.
Listening to FM Broadcasts

 

Press

Functions

Unit

 

Remote control

 

 

 

 

 

Switch FM stereo/monaural.

 

 

 

When there is too much static in an FM stereo broadcast, you

FM MODE/

 

 

can reduce the static by switching to monaural reception.

 

 

Press again to switch back to stereo reception.

 

 

 

 

 

 

If the broadcast is not FM stereo, the sound becomes

 

 

 

monaural, even if FM stereo is selected.

Switch channel display / frequency display. Channel display is automatically switched to frequency display after approx. 3 seconds.

NOTES

The connector plug is protected with a cover when it is first purchased. Please remove the cover before operating the unit.

Do not carry the System with iPod connected. You might drop it down or it might cause damages to the connector part.

Do not touch or hit the iPod terminal pins or the connector pins directly. It might cause damages to the connector part.

If the iPod does not play correctly, please update your iPod software to the latest version. - For details about updating your iPod, check on the Apple web site <http://www.apple.com>.

iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

JVC is not responsible for any loss of or damage to iPod that might result from the use of this product.

Sound distortion may occur when playing back audio sources with high recording levels. When distortion occurs, it is recommended to turn off the equalizer of the iPod. For information on operating the iPod, see the iPod instruction manual.

Listening to FM radio

Stretch out the wire antenna located on the rear of the unit before using.1Turn the Unit power on.2Select “FM” with the “SOURCE” button.3Select a station with the “4”/“¢” button.

Presetting Stations

1 Select “FM” with the “SOURCE” button, and switch to channel display with “6” button.

4 ¢

Playing back from other equipment

Connecting other equipment

Connect an external device to the AUX jack on the rear of the unit using a stereo mini plug cord (not supplied) .

To audio output such as CD/MD/digital audio player, etc.
NOTE

• Always set volume to the minimum level when connecting or disconnecting the other equipment.

Listening to external devices

1Turn the unit power on.2Select “AUX” with the “SOURCE” button.3Start playback on the external device.4Adjust the volume.

6

Frequency displayChannel display
To register a channel, press and hold this button. (see “Presetting Stations”)

¢

 

Select a channel from P01 to P20.

4

 

(The unit button can be used when channel display is selected.)

 

 

 

 

 

Change frequencies to tune in to FM radio station. (The unit

¢

 

button can be used when frequency display is selected.)

 

• Press and hold to search broadcast stations automatically.

4

 

 

The search is finished when the signal is received. Press

 

 

 

 

again while searching to quit search.

2

Use the “

”/“

” button to select the channel number (P01 to P20) to be registered.

3

Press and hold the “6” button. The channel number starts flashing.

 

 

 

 

 

 

 

 

4

Use the “4”/“¢” button to select the frequency (87.5 MHz to 108.0 MHz) of the station that you wish

 

to register.

 

 

 

5

Press the “6” button The selected frequency will be registered.

 

 

 

 

 

 

 

 

 

 

 

 

To confirm registration, select the registered channel number (P01 to P20), and press “6” button to display frequency.