SETTING THE CLOCK
1 | 2, 4, 6 | 3, 5 | 3, 5 | 1 |
| 3, 5 |
|
|
|
| STANDBY/ | TAPE | MENU/ |
|
|
|
| ON / | FM MODE | |
|
|
|
| CD | USB | TUNER/ |
|
|
|
| BAND | ||
|
|
|
|
| STOP/ |
|
|
|
|
|
| ENTER |
|
|
|
|
| RANDOM |
| PROGRAM/ |
|
|
|
| REPEAT PRESET | ||
|
|
|
| MUTING | SLEEP | EQ |
|
|
|
| 1 | 2 | 3 |
|
|
|
| 4 | 5 | 6 |
|
|
|
| 7 | 8 |
|
|
|
|
| 9 | 0 | VOL |
|
|
|
| REMOTE CONTROL UNIT |
English
Before operating the unit any further, first set the clock built in this unit.
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.
1Press STANDBY/ON to turn on.
2Press and hold CLOCK. The hour digits start flashing.
3Press 4 or ¢ to adjust the hour.
4Press CLOCK.
The minute digits start flashing.
5Press 4 or ¢ to adjust the minutes.
6Press CLOCK.
Note:
If there is a power failure, the clock loses the setting. The clock indication will keep flashing until you set the clock again.
To show the clock when the unit is on
Press CLOCK.
Each time you press the button, the display changes the clock indication and the normal indication alternately.
To set the sleep timer
When the time you specify elapses, the system will be turned off automatically.
On the remote control only.
1Press SLEEP.
Flashing “SLEEP | 10” and “ S ” are displayed. | |||
|
|
|
|
|
| 005 | 00:01 |
|
|
| SLEEP 10 | S |
| |
|
|
|
|
|
Each time you press the SLEEP button, the time length changes as follows:
10=20=30=60=90=120=OFF=(back to the beginning)
2Wait for a few seconds.
Only the “ S ” is displayed, and the sleep timer is set.
To Confirm the Sleep Time:
Press SLEEP once while the sleep timer is set. To Cancel the Sleep Timer Setting:
Press SLEEP repeatedly until “SLEEP OFF” appears.
Note:
The sleep timer will also be cancelled when the power is turned off.
7