27
1.
Press and hold the MENU button for about 3 seconds to
display the SETUP screen.
2.
Select POSITION SETUP and press the SET button.
“– POSITION SETUP MODE –” with the currently selected
Camera No. and the Position No. are displayed. ("C01 -
P05" shows the Camera 1, Position 5.)
3.
Select a camera number.
CAMERA button ➝ Numeric keys ➝ ENTER button
4.
Select the position number to be preset.
POSITION button ➝ Numeric keys ➝ ENTER button
In this case, the camera screen shifts to the pre-regis-
tered POSITION.
5.
Set the image angle.
Set it using the PAN/TILT control lev er and the IRIS, ZOOM
and FOCUS control buttons.
6.
Press the SET button for about 1 second.
A short beep indicates that the position has been memo-
rised.
"Invalid operation" is displayed when using the camera which
the position can not be preset, such as fixed camera.
7.
To preset other positions, repeat steps
4
to
6
.
64 positions including the home position can be preset.
5. MENU SCREEN SETUPS
POSITION SETUP SCREEN
This screen is used to preset, correct or delete the camera positions.
No position can be selected unless it has been preset.
Up to 64 positions including the home position can be preset.
Presetting and Correcting Camera Positions
Select the camera ID number and the position number in the
same way as presetting or correcting a position.
(Steps
1
to
4
of “Presetting and Correcting Camera Positions”)
1.
Press and hold the CLEAR button for about 1 second.
A short beep is generated and the position is cleared.
Clearing a Camera Position
SETUPSETUP
MENUMENU SETSET
SPEEDSPEED
IRISIRIS
AFAF
FOCUSFOCUS
ZOOMZOOM
OPENOPEN
FARFAR
TELETELE CLEARCLEAR /HOME/HOME
7
4
1
8
0
5
2
9
6
3
ENTERENTER
AUTOAUTO
PANPAN
OPTIONOPTION
1OPTIONOPTION
2
CAMERACAMERA
POSI-POSI-
TIONTION
AUTOAUTO
PATROLPATROL
CLOSECLOSE
NEARNEAR
WIDEWIDE
AUTOAUTO F-1F-1 F-2F-2 F-3F-3
PAN/TILTPAN/TILTLENSLENS
CAMERA/POSITIONCAMERA/POSITION
CAMERACAMERA POSITIONPOSITION
REMOTE CONTROL UNIT REMOTE CONTROL UNIT
RM-P2580RM-P2580
ALARM
POWER
KEY LOCK
MENU button
POSITION button
CAMERA button
SET button
PAN/TILT control lever
ENTER button
Numeric keypad
Lens operation buttons
– POSITION SETUP MODE –
CO1-PO5
SETUP
POSITION SETUP..
CAMERA..
CONTROL UNIT..
SETUPSETUP
MENUMENU SETSET
SPEEDSPEED
IRISIRIS
AFAF
FOCUSFOCUS
ZOOMZOOM
OPENOPEN
FARFAR
TELETELE CLEARCLEAR /HOME/HOME
7
4
1
8
0
5
2
9
6
3
ENTERENTER
AUTOAUTO
PANPAN
OPTIONOPTION
1OPTIONOPTION
2
CAMERACAMERA
POSI-POSI-
TIONTION
AUTOAUTO
PATROLPATROL
CLOSECLOSE
NEARNEAR
WIDEWIDE
AUTOAUTO F-1 F-2 F-3F-3
PAN/TILTPAN/TILTLENSLENS
CAMERA/POSITIONCAMERA/POSITION
CAMERACAMERA POSITIONPOSITION
REMOTE CONTROL UNIT REMOTE CONTROL UNIT
RM-P2580RM-P2580
ALARM
POWER
KEY LOCK
POSITION display
CLEAR button
NOTE:
Home position is not clearable.