To turn off the power (into standby mode),
press | (STANDBY/ON) again. |
The STANDBY lamp lights up, and the front door automatically closes. (The ZONE 1 ON/ OFF and/or ZONE 2 ON/OFF lamp goes off.)
•A small amount of power is consumed in standby mode. To turn the power off completely, unplug the AC power cord.
From the remote control:
1. Set ZONE 1/ZONE 2 (LEARN/
LEARN TRANSMIT
TRANSMIT) selector to “ZONE 2.”
Now the buttons and controls on the remote
ZONE 1 ZONE 2
control work for Zone 2 operations.
2. Press AUDIO (ON).
The STANDBY lamp on the unit goes off, and the ZONE 2 ON/ OFF lamp on the unit lights up.
Canceling the Zone 2 Operations
On the unit: |
|
| |
To stop Zone 2 operations and sounds through the | ZONE 2 | ||
Zone 2 speakers, press ZONE 2 ON/OFF so that the | ON/OFF | ||
| |||
ZONE 2 ON/OFF lamp goes off. |
|
| |
No sound will be heard in Zone 2, and the display |
|
| |
changes to show the Zone 1 source. |
|
| |
|
|
|
|
|
| SPEAKERS 1 | ZONE 2 |
|
|
| VOLUME |
|
|
| dB |
|
|
|
|
|
|
|
|
| ANALOG | SPEAKERS 1 |
|
| LR |
| |
|
|
| |
| SUBWFR |
| VOLUME |
|
|
| dB |
|
|
|
|
English
STANDBY ON
ZONE 2
ON/OFF
• When connecting the Zone 2 front speakers to the FRONT 2/ |
ZONE 2 SPEAKERS terminal, see also “w Setting the Zone |
To use this receiver for Zone 2 operations again
1.Press ZONE 2 ON/OFF again so that the ZONE 2 ON/OFF lamp lights up.
2.Press ZONE 2 CONTROL (inside the front door).
The name of the current source for Zone 2 appears on the display.
ZONE 2
ON/OFF
ZONE 2
CONTROL
2/Speakers 2 |
“Activating the Zone 2 Front Speakers” on page 32. |
To turn off the power (into standby mode), |
|
|
|
| ||
|
|
|
| |||
press AUDIO |
| (STANDBY). | STANDBY | ON | ||
| ||||||
The STANDBY lamp lights up, and the front |
|
|
|
| ||
|
|
|
| |||
door automatically closes. (The ZONE 1 ON/ |
|
|
|
| ||
OFF and/or ZONE 2 ON/OFF lamp on the unit |
|
|
|
| ||
goes off.) |
|
|
|
| ||
Note:
If you have turned off the receiver with the volume level set at more than level
SPEAKERS 1 | ZONE 2 |
VOLUME
dB
From the remote control:
To stop Zone 2 operations and sounds through the | ZONE 2 | |
ON/OFF | ||
Zone 2 speakers, press ZONE 2 ON/OFF so that the | ||
|
ZONE 2 ON/OFF lamp on the unit goes off.
To use this receiver for Zone 2 operations
again, press ZONE 2 ON/OFF again.
Notes:
•If you have turned off Zone 2 with the volume level set at more than level
•If “TURN ON ZONE1 OR ZONE2” appears on the display, press ZONE 1 ON/OFF or ZONE 2 ON/OFF to listen to the sound in Zone 1 or in Zone 2; otherwise, the receiver will turn off after about 1 minute.
30