English
All Channel Stereo mode
This mode can reproduce a larger stereo sound field using all the connected (and activated) speakers. This mode cannot be used
without activating the surround speakers.
•If headphones are connected or if the front speakers are deactivated, “ALL CH STEREO” cannot be selected.
•The settings on the EFFECT ADJUST submenu are not valid for “ALL CH STEREO.”
Stereo Film and Monaural Film modes
In order to reproduce a more acoustic sound field in your listening room while viewing stereo sound or monaural sound video software (analog and
STEREO FILM : To play back stereo video software
MONO FILM : To play back monaural video software
When “STEREO FILM” or “MONO FILM” is used, sounds come out of all the connected (and activated) speakers.
•If incoming signals changes from
Activating the DSP Modes
Perform the basic settings and adjustments using the Setup and Adjustment Menus first (see pages 35 to 50).
Activating one of the DSP modes for a source automatically recalls the memorized settings and adjustments.
IMPORTANT:
Check to see if the following before or while using the buttons and controls.
For the Zone 1 operations:
The ZONE 1 ON/OFF lamp on the unit is lit.
• When using the unit: |
|
– “ZONE 2” is not shown in the main display. | DOOR |
| DOWN |
–Press DOOR DOWN to use the buttons inside the front door.
To close the front door, press DOOR UP.
•When using the remote control:
–Set the ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector to “ZONE 1.”
–Check the indication shown on the remote’s display when you press a
|
| LEARN TRANSMIT |
| |
|
|
| STANDBY | ON |
|
| ZONE 1 | ZONE 2 |
|
LEARN TRANSMIT | ZONE 1 | ZONE 2 TV/CATV/DBS | VCR 1 | |
ON/OFF | ON/OFF |
| ||
|
|
| ||
|
|
| STANDBY/ON | STANDBY/ON |
ZONE 1 | ZONE 2 | ZONE 1 |
|
|
|
|
| ||
Ex. When you press DSP with
ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector set to “ZONE 1.”
1.Select and play any sound source.
2.Press DSP repeatedly until the DSP mode you want appears on the display.
•Each time you press the button, the DSP modes change as follows:
DSP
DSP
| On the unit | From the remote control | |
(inside the front door) | |||
| |||
|
|
| |
| DGTL AUTO | SPEAKERS 1 | |
L C | R | ||
PARAMETRIC EQ MIDNIGHT MODE | |||
|
| ||
SUBWFR | LFE DIGITAL | VOLUME | |
LS | DSP |
| |
RS |
| ||
dB
=LARGE HALL 1 = LARGE HALL 2 = RECITAL HALL
=OPERA HOUSE = CHURCH = LIVE CLUB
=DANCE CLUB = PAVILION = ALL CH STEREO
=LARGE THEATER = SMALL THEATER
=STEREO FILM* = MONO FILM*
=(Back to the beginning)
*When
Notes:
•When the surround speakers are deactivated, the
•If the Surround/THX mode is in use, it will be canceled when you turn on the DSP mode.
To adjust the DSP effects
Using the 10 keys on the remote control, you can adjust the level of the overall effect and the liveness (except for “ALL CH STEREO”).
•Once you adjust the levels using the following procedure, the adjustments you have done on the Adjustment Menu will be also changed. (It is recommended to adjust the DSP effects using the Adjustment Menu since you can adjust other elements as well.)
1. Press SOUND. | SOUND |
The 10 keys are activated for sound adjustments.
2. Press EFFECT repeatedly to adjust the level
EFFECT
of the overall effect (1 to 5).
3
3.Press LIVENESS repeatedly to adjust the liveness (1 to 5).
LIVENESS
6
To cancel the DSP modes
Press SURR/DSP OFF.
“SURROUND OFF” appears on the display.
SURR/DSP | SURR/DSP |
OFF | OFF |
|
On the unit | From the remote control | |
(inside the front door) | ||
|
•When a pair of headphones is connected or when the front speakers are deactivated, “HEADPHONE” will appear.
59