JVC SA-DV6000 manual 20

LAN connections

Wired LAN

The SA-DV6000 supports wired LAN connections to client computers either locally, through an intranet or over the internet. Connecting multiple VTR to a Client PC, or multiple Client PC to a VTR is supported. In addition, it is possible for a client to remotely control the VTR as well.

A list of LAN card currently supported by the SA-DV6000 is shown on Page 4. Any compatible LAN card can be used in the Client PC. For LAN card settings on the Client PC side, see the instruction manual of the Client PC or LAN card.

\ Wired Connections, Single VTR to Single Client PC

								OPERATE
	MENU	DISP	RESET	PROFESSIONAL	A.DUB		REC	PLAY	PAUSE
	SEARCH–	SET	SEARCH+
					EJECT		REW	STOP	FF
MIC	HOLD	BLANK	CUE UP
	PHONES	REC LEVEL					AUDIO	INPUT
					COUNTER MONITOR OUTPUT SELECT				REMOTE
					CTL	L	CH-1/2	DV
					TC	MIX	MIX	LINE
		CH-1/3	CH-2/4	BR-DV6000	UB	R	CH-3/4	Y/C	LOCAL
								(CPN)

10/100 BASE-T cross cable

Set a unique number to avoid doubling

*For the PC settings when using a LAN card, refer to the instruction manual included with the LAN card.

*Up to 10 clients can access at the same time.

DHCP OFF		PROXY SERVER NO USE
		DHCP SERVER NO USE
IP ADDRESS	192. 168. 100. 101	IP ADDRESS	192. 168. 100. 100
SUBNET MASK	255. 255. 255. 000	SUBNET MASK	255. 255. 255. 000

Set the same domain

NOTE:

Refer to the appropriate manual for setting the LAN card or Client PC

Perform the following settings for the above configuration.

●DHCP should be OFF2

●VTR and Client PC are set the same domain and different IP addresses.

●The Netmask of both the VTR and computer must be the same

●A CAT-5 cross cable is used between the VTR and computer

●Set the network connection of the Client PC to use no proxy server. Please refer to Page 27 for information regarding this setting if troubles are encountered.

2In case the connecting Client PC is not a server equipped with a DHCP feature.

20