JVC SA-DV6000 manual 60

Network remote control Transferring clips on a CF memory card to a server

By connecting the LAN terminal of the SA-DV6000 to a network, clips on a CF memory card can be transferred to a server via FTP.

Caution

Before using this function, it is necessary to set the destination, etc. of the clip using the FTP CLIENT SETUP screen. (☞ page 50)

FTP SEND SETUP screen

Clip selection:

Select the checkboxes of the clips to transfer

Screen selection

CANCEL button:

Cancels transfer.

FTP button:

Starts transfer.

Preparations

●Insert a pre-recorded CF memory card into the network pack.

●Connect the LAN terminal of the network pack to a network.

●In the FTP CLIENT SETUP screen of the Streamcorder, set the transfer destination of the clips.

Operating the FTP SEND SETUP screen

1. Click FTP SEND SETUP on the left side of the Stramcorder screen to display the FTP SEND SETUP screen as shown above.

2. Select the clips to transfer.

Select the checkboxes of the file numbers to transfer. (Multiple selections allowed)

3. Click the FTP button to transfer the selected clips to the server.

\To cancel transfer, click the CANCEL button.

60