52 EN EDITING
Dubbing DV Format Contents To A DV Device (HDD Deck Only)

You can dub programmes recorded in DV mode on the HDD deck to a camcorder or DV equipment.

NOTE:

When connecting the unit to a device equipped with a DV input connector, be sure to use the optional DV cable (VC-VDV 204U).

Your unit

 

 

 

 

Player

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital Audio Dubbing

You can dub selected audio from a DVD or Audio CD disc to a digital audio device.

However, it is not possible to dub copy-protected discs.

●Turn on the TV and select the AV mode.

●Slide the TV/DVD switch to DVD.

Example: Dubbing to an MD

Recorder

 

 

Digital audio device

 

 

To [DV IN/OUT]

(MD deck, etc.)

 

 

 

 

Recorder

 

Coaxial cable

Optical cable

 

(not supplied)

(not supplied)

Camcorder

DV cable

To [DIGITAL AUDIO

To [DIGITAL AUDIO

 

 

(VC-VDV 204U)

 

OUTPUT (COAXIAL)]

OUTPUT (OPTICAL)]

 

(not supplied)

 

Player

 

 

 

 

To DV input

Rear of unit

DV equipment

Note for connection:

Remove the protection cap from the optical cable.

1Connect the camcorder or DV equipment’s DV input connector to the unit’s [DV IN/OUT] connector.

2Press DV/HDD/DVD on the unit repeatedly or HDD on the remote so that the HDD lamp lights up on the unit.

3Press INPUT SELECT +/– on the remote control or INPUT SELECT on the unit to select ADVB.

4Set the camcorder or DV equipment’s input channel to DV.

5Select and play back the programme (DV mode) from the Library Database Navigation.

6Start recording on the camcorder or DV equipment.

7When dubbing is completed, stop recording on the camcorder or DV equipment, then stop playback on the HDD deck.

NOTES:

●The channel of this unit must be set to ADVB in order to output the images (DV mode).

●Images other than those recorded in DV mode will not be output.

1Connect the unit and a digital audio device using either an optional optical cable or an optional coaxial cable.

2Place a disc on the unit and load an MD on the connected digital audio device.3Select the audio to be dubbed.

4Start playback slightly before the actual point from where you wish to start dubbing.

5Press W to pause playback.6Select the input mode on the connected digital audio device.7Press I to start playback on the unit.8Start recording on the digital audio device.

9Stop recording on the digital audio device. Then press oto stop playback on the unit.

NOTE:

There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.