Filename [SR-VS30E_2-EN.fm]
Masterpage:Left
36 EN
Page 36 February 1, 2002 3:23 pm
TIMER RECORDING
SHOWVIEW® Timer
Programming
With the SHOWVIEW system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your recorder is able to recognize.
You can use the remote control with LCD panel to enter the
SHOWVIEW number.
ATurn on the recorder.
Press 1.
BLoad a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
OR
Insert a Mini DV cassette with the erase protection switch
set to “REC”.
CSelect the deck.
Press VHS or DV.
DAccess the SHOWVIEW display.
Press LCD PROG.
The LCD panel looks like this:
EEnter the SHOWVIEW number.
Press the number keys to enter the SHOWVIEW number of
a programme you wish to record.
●If you make a mistake, press & and input the correct number.
The SHOWVIEW number you enter appears on the LCD panel:
FTransmit the SHOWVIEW number.
Press to transmit the SHOWVIEW number from the
remote control to the recorder.
●If the number you entered is invalid, “ERROR” appears on the
TV screen and “Err” appears on the front display panel. Input a
valid SHOWVIEW number.
Before performing the SHOWVIEW Timer
Programming:
●Make sure that the recorder’s built-in clock is set properly.
●Turn on the TV and select the AV mode.
123
456
789
1
2
1
2
3
0
3
4
4
LCD panel
SR-VS30E_1-EN.book Page 36 Friday, February 1, 2002 3:35 PM