Troubleshooting (Continued)

problems Other

Trouble

Action

 

• If there are many files (such as video) in the camcorder, it takes

The camcorder operates

slowly when switching

time for the camcorder to respond. It is recommended that you

between video mode

copy all files from the camcorder onto your computer, and erase

and still image mode,

the fi les from the camcorder.

or when switching the

 

power on or off.

 

 

• Check the remaining battery pack charge.

 

(When the battery pack is fully charged, the lamp does not fl ash.)

The lamp does not flash

• When recharging in either a hot or cold environment, ensure that

during battery pack

battery is being charged within the permitted temperature range.

charging.

(If the battery pack is being recharged outside the permitted

 

temperature range, recharging may stop to protect the battery

 

pack.)

 

• Replace the battery.

The remote control does

• Set [REMOTE] to [ON].

not work.

• The remote control may not operate outdoors or in places

 

exposed to strong light.

When connecting to

• When connecting to the HDMI cable, the image or sound may not

the HDMI cable, the

appear on the TV properly depending on the TV connected. In

image or sound does

such cases, perform the following operations.

not appear on the TV

1) Disconnect the HDMI cable and connect it again.

properly.

2) Turn off and on the camcorder again.

HDMI-CEC functions do

• TVs may operate differently depending on the specifi cations,

not work properly, and

even if they are HDMI-CEC compliant. Therefore, the HDMI-CEC

the TV does not work

functions of the camcorder cannot be guaranteed to operate in

in conjunction with the

combination with all the TVs. In such cases, set [HDMI CONTROL]

camcorder.

to [OFF].

The language on the

• It may occur when you connect the camcorder to a TV with

display changed.

different language setting using an HDMI cable.

￿If a malfunction occurs in the HDD

! Perform [FORMAT HDD]. (All data is deleted.)

#If this does not solve the problem, perform the disc check function from a PC after formatting. $ If this does not solve the problem, contact the JVC customer service for repairs.

￿To reset the camcorder when it does not operate normally

! Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the camcorder, then reattach it.

#Execute [FACTORY PRESET]. (￿ p. 62)

68EN