BRACKETING

Records 5 continuous images from dark (-0.6EV) to bright (+0.6EV) based on the brightness of still images set in AUTO or

MANUAL.

After performing steps 1-2

3 Press SNAPSHOT.

NOTE

•When there is no SD, or when there is no remaining space on the SD card, it is not possible to save still images.

•When the continuous shooting or bracketing indicator is blinking, do not set Scene Select to [PORTRAIT], [NIGHT & PORTRAIT], or [SPORTS]. (Z p. 37)

•When Scene Select (Z p. 37) is set to [TWILIGHT], [SLEEPING FACE], or [FIREWORKS], the continuous shooting speed is slow.

Turning on the Face Detection Mode

If you set this mode on, the camera detects the faces and adjust brightness and focus so that the faces are recorded clearly.

Preparation:

•Select the recording mode.

•Select ! or # mode.

Select .

To turn off the face detection mode Select again.

Recording still images with the face detection mode turned on

1 Press and hold SNAPSHOT halfway.

2 Press SNAPSHOT.

Using the self-timer in the face detection mode

Preparation:

Set [SELF-TIMER] to [FACE DETECTION].

1 Press SNAPSHOT.

Faces are detected.

2 The still image is recorded 3 seconds after the face of the photographer is detected.

Photographer

NOTE

•If the LCD monitor is turned upside down,

is not displayed. Change the setting when the LCD monitor is in the normal position.

•You cannot turn on the face detection mode if [SELF-TIMER] is set to [FACE DETECTION]. (This is indicated by blinking .)

•Depending on the condition, faces may not be detected.

•If the face detection does not work correctly, turn off the mode before recording.

EN 27