– 19 –
English
CD Direct Recording
Everything on the CD goes onto the tape in the order it is on
the CD, or according to the order you have made for Program
Play.
On the unit ONLY:
1
Put a recordable cassette in with the exposed
part of the tape down.
2
Load a CD.
• If the current playing source is not the CD player, press
CD 3/8, then 7 before going to the next step.
— If you do not want pauses of about 4 seconds
recorded between selections, press CD 3/8 twice.
Otherwise, non-recorded pause will be
automatically recorded between selections.
• If you want to record on both sides of a tape, see “To
record on both sides—Reverse Mode.”
3
Press REC (recording).
The REC (recording) indicator lights up on
the display and recording starts.
After recording, the CD player and cassette deck
automatically stop.
To stop while recording, press 7.
The tape stops after 4 seconds.
To remove the cassette, press 0 PUSH OPEN on the unit.
To record on both sides—Reverse Mode
Press REV.MODE (reverse mode) until
the indicator is lit.
• When using the Reverse Mode for CD
Direct Recording, start recording in
the forward (3) direction first. When
the tape reaches its end while
recording a song in the forward
direction (3), the last song will be re-
recorded at the beginning of the
reverse side (2).
If you start recording on the reverse
side (2), recording will stop when recording is done only
on one side (reverse) of the tape.
When making Sleep Timer settings while doing CD
Direct recording
Set enough time to allow for the CD to finish playing; otherwise the
power will go off before recording is completed.
One Track Recording
This recording method is convenient when you record tracks
while playing the CD. You can only record your favorite
songs on the tape.
On the unit ONLY:
1
Put a recordable cassette in with the exposed
part of the tape down.
2
Play the track on the CD you wish to record.
3
Press REC (recording).
The CD player returns to the beginning of
that track and the track is recorded on the
tape.
After recording, the CD player and cassette deck
automatically stop.
4
Repeat steps 2 and 3 to record other tracks
you want.
To stop while recording, press 7.
The tape stops after 4 seconds.
To remove the cassette, press 0 PUSH OPEN on the unit.
REC
REC
REV.MODE
REV. MODE
On the unit
(only for UX-L30)
EN18-24_UX-L40&30[UW&UY]f 02.3.8, 10:39 AM19