Internet Explorer Setting
Settings (continued)
Camera Page (continued)
C Brightness | Adjusts the brightness of an image. | ||
| Increasing the value brightens dark areas, and decreasing the value makes | ||
| bright areas more pleasing to the eye. | ||
| [Set values: 5 to Normal to 5] | ||
|
| ||
D Color Level | Adjusts the color level. | ||
| A larger value increases the darkness of color, but a smaller value | ||
| decreases the darkness of color. | ||
| [Set values: 5 to Normal to 5] | ||
|
| ||
E Black Level | Adjusts the black level. Setting the value to "Low" darkens the video image. | ||
| [Set values: Low, Normal] | ||
| Memo: |
|
|
|
| ||
| ● If the black level is set to ALowB, this may be too low depending on the | ||
| monitoring device, or dark area will become complete black. | ||
| ● When using the Monitor Output or | ||
| "Normal". | ||
|
|
| |
|
| ||
F Gamma | To alter the appearance of dark areas in a video image, adjust the gamma curve. | ||
| ON : Perform gamma correction. | ||
| OFF : Do not perform gamma correction. The entire image appears dull. | ||
| [Set values: ON, OFF] | ||
|
| ||
G Enhance Level | Sets the intensity of edge enhancement. | ||
| A larger value increases the intensity of edge enhancement, but a smaller | ||
| value decreases the intensity of edge enhancement. | ||
| [Set values: 5 to Normal to 8] | ||
|
| ||
H 3D DNR | The noise on the screen will be reduced. | ||
| [Set values: OFF, Low, Mid, High] | ||
Memo:
●With a moving object, the higher the noise reduction (as you select Low - Mid - High), the more likely there will be an afterimage.
●You cannot select this when the frame rate is set to 25 fps or higher.
*The [Set values] in bold letters are factory defaults.
20