
LED State Page
This page sets the [STATUS] LED indication of the camera.
This page can be used during access using AadminB or AoperatorB.
A
B
Click [Advanced Settings] and [LED State].
Memo:
●Press the [OK] button to enable the new settings. If you press the [Cancel] button, your changes are canceled and the current camera settings are displayed.
Status LED |
| Allow to check and set the [STATUS] LED indication of the camera. | |||
|
|
|
| ||
| A LED State |
| Turns the [STATUS] indicator On or Off when the camera is operating. | ||
|
|
| Enable | : Continues to light when the camera is operating. | |
|
|
| Disable | : Turns the indicator Off after the camera has started. | |
|
|
| [Set values: Enable, Disable] | ||
|
|
|
| ||
| B Identify Unit |
| If you wish to blink the [STATUS] indicator of the camera, set this option to | ||
|
|
| ABlinkB. This may occur if you wish to visually check the camera operation | ||
|
|
| when configuring the camera from the computer. | ||
|
|
| [Set values: Enable, Blink] | ||
|
|
| Memo: |
|
|
|
|
|
|
| |
|
|
| ● If you have set the [LED State] to ADisableB, the indicator does not light | ||
|
|
| even when you set the [Identify Unit] to ABlinkB. | ||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| * The [Set values] in bold letters are factory defaults. |
81