Side

KL

MONITOR OUT

PAL OFF NTSC

RESET

STATUS

IRIS

N M

K[MONITOR OUT] Monitor Output Selection

Switch

Use this switch to select the availability of output from the O [MONITOR OUT] terminal as well as the signal system.

NTSC : Outputs NTSC signals.

OFF

: No output. Select this value when

 

distributing images to the network.

PAL

: Outputs PAL signals.

[Default setting: OFF]

Caution:

●Images are not distributed to the network when ANTSCB or APALB is selected.

●When the switch is changed, press the L Reset button to reboot the unit.

L [RESET] Reset Button

This is a button for rebooting the camera. Press this button and release within 5 seconds to reboot the camera.

It takes about one minute for the camera to reboot. During startup, the [RESET] button is disabled.

Note:

Pressing the [RESET] button for 5 seconds or longer switches the camera to the service verification mode. Do not press the button for 5 seconds or longer.

M [IRIS] Iris Terminal

Use this terminal to connect the DC iris lens. (Connection with the video iris lens is not possible.)

(A Page 16)

N [STATUS] Status Indicator

This status of this product is indicated in green or orange color.

Starting up: Lights up in orange

Startup complete: Lights up in green

Error: Blinks in orange

Note:

You can adjust the [LED State] settings via the network to turn off the indicator after startup is complete.

11