Mounting the Camera
Use the screw hole on the camera mounting bracket to mount this camera to a fixer or rotating platform.
Camera |
| |
Mounting | Camera Mounting | |
Screw Hole | ||
Bracket Fastening Screw | ||
(2 pcs: M2.6 x 6 mm) | ||
|
Mounting the camera mounting bracket on the top of the camera
Camera
Mounting
Bracket
|
| Caution: |
|
| ● When mounting the camera, use screws with |
|
| a length between 5 mm to 7 mm from the |
|
| mounting surface. Screws beyond the |
Camera | specified length may damage the interior, | |
Mounting | while those shorter than specified may cause | |
| Bracket | the camera to fall off, and therefore these |
|
| must not be used. |
| Fall |
|
| Prevention |
|
| Wire |
|
|
| |
|
| 5 mm and |
|
| above |
|
| 7 mm and |
| M3x6 mm | below |
|
| |
| (15/64 inch) |
|
| 6 mm |
|
|
| Caution: |
| 2 mm and below | ● The camera mounting bracket is mounted on |
|
| the bottom surface of the camera by default. |
To mount it to the top surface, do so by removing the two fastening screws from the camera mounting bracket. Make sure to fasten the screws firmly.
21