6.The top page of VN-V25U/26Uappears

Click on [Network], followed by [Basic] on the next submenu.

7.The [Basic] page with the IP address settings appears when DHCP is not in use

A Set the [IP Setting] item to [DHCP

Disable].

B Enter the values you wish to specify in the [IP Address], [Subnet Mask] and [Default Gateway] fields.

C Click [OK].

A confirmation screen appears. Press the [OK] button. VN-V25U/26Urestarts using the new IP address. It takes about one minute for the camera to reboot.

Note:

●Access from this computer may fail when the IP address of VN-V25U/26Uis changed. To enable access to VN-V25U/26Ufrom the same computer, alter the IP address at the computer accordingly.

When the display or configuration of the opened screen appears strange, check using the following procedures.

AClick [Start]-[ControlPanel]-[Display]and open the [Display Properties] window

BClick the [Settings] tab in the [Display Properties] windows and click the [Advanced] button

CCheck that [DPI setting] in the [General] tab has become [Normal size(96DPI)]

DOtherwise, change the setting to [Normal size(96DPI)] andreboot windows

31